J Johniom Initiate Joined May 9, 2018 Messages 15 May 15, 2018 #1 just purchased my first RDA. (yay) where would you recommend i start? what coils/ohms would you have done if it was your first? dual coil 3.2.1. go
just purchased my first RDA. (yay) where would you recommend i start? what coils/ohms would you have done if it was your first? dual coil 3.2.1. go
hariboholmes Postman Joined Mar 3, 2017 Messages 315 May 15, 2018 #2 For a nice performing easy starter build I'd go for a dual 24awg NI80 3mm ID 6 wraps. Ran at 50-65w Could do with knowing which RDA though... big difference between something like a Goon and something like an Armor 1.0 or M-Atty
For a nice performing easy starter build I'd go for a dual 24awg NI80 3mm ID 6 wraps. Ran at 50-65w Could do with knowing which RDA though... big difference between something like a Goon and something like an Armor 1.0 or M-Atty
Spambunny Postman Joined May 12, 2018 Messages 263 May 15, 2018 #3 Johniom said: just purchased my first RDA. (yay) where would you recommend i start? what coils/ohms would you have done if it was your first? dual coil 3.2.1. go Click to expand... Congrats RDAs are the way to go
Johniom said: just purchased my first RDA. (yay) where would you recommend i start? what coils/ohms would you have done if it was your first? dual coil 3.2.1. go Click to expand... Congrats RDAs are the way to go
J Johniom Initiate Joined May 9, 2018 Messages 15 May 18, 2018 #4 Digiflavour drop - also have some random Chinese clone RDA
CarbonBoy Achiever Joined Oct 27, 2017 Messages 1,069 May 18, 2018 #5 I’d keep it simple and focus on learning to build on the deck. Two simple round wire coils. Six wraps, 3mm diameter, 24 or 26 gauge wire. Should come out around .6 or .5
I’d keep it simple and focus on learning to build on the deck. Two simple round wire coils. Six wraps, 3mm diameter, 24 or 26 gauge wire. Should come out around .6 or .5
Andii Postman Joined May 3, 2018 Messages 140 May 19, 2018 #6 3mm id, skip kanthal and go for Ni80 or SS wire, it's lower resistance wire so you'll need a few wraps more than with kanthal, but faster ramp up, better flavour and nice heat
3mm id, skip kanthal and go for Ni80 or SS wire, it's lower resistance wire so you'll need a few wraps more than with kanthal, but faster ramp up, better flavour and nice heat