MTB Vaper
Postman
- Joined
- Jan 3, 2024
- Messages
- 370
Made a flat coil using 25awg Ni80 wrapped around a 3mm screwed driver, pulsed at 20w and it heats from the centre out. Wicked up with 3mm BPMODS cotton. The Arcanes deck is alot easier to build using flat wire, theres a some wiggle room adjusting the leg lenght to get the correct height. This was my second attempt as the firsted i failed the wrapping. The Ni80 heats up much quicker then the Kanthal twist.