Fogger owners can you help?

[IrishHobo]

Guys I'll have my Fogger in the morning and I'm rather paranoid that I've ordered the wrong wick and wont be able to use it properly.

I've ordered 1mm Ekowool and 0.8x0.1 ribbon wire. After finding a few threads online tonight I'm worried about the wicking/flooding problems that I seem to have missed before ordering.

Can some of you guys post up any pics/info of builds you have done with similar materials so I can get an idea of what to aim for.

 

[jocave]

Fogger is the only thing i use now , tried every possible combo going but the build i use now is micro coil and cotten, never have any issues with that build

 

[IrishHobo]

Fogger is the only thing i use now , tried every possible combo going but the build i use now is micro coil and cotten, never have any issues with that build

Well I may need your help tomorrow morning so ring in sick, tell the wife and kids you have more important things to do and help me with my first build

In all seriousness any help would be very much appreciated. I've never even seen a mech/rta before never mind coiled one.

 

[jocave]

V2 needs a few tweeks when first used but a well set up fogger is fantastic, its all o use now i like if that much

 

[IrishHobo]

V2 needs a few tweeks when first used but a well set up fogger is fantastic, its all o use now i like if that much

I'm not sure there are many differences but I have a V3 coming, sorry forgot to mention that.

 

[BAVapes]

No experience with the v3, but this is how I build my v4.3

28awg @ 9 or 10 wraps around 2mm x 2 = 1ohm

 

[Crumps]

Just a heads up- my fogger v4 needed totally disassembling and two or three damn good scrubs in warm soapy water when I got it, as it was coated in machine oil.

You'll be fine bud. There are plenty of videos on YouTube.

 

[Souterain]

BAVapes How'd you get that to sit flush on the MVP?

 

[IrishHobo]

Well guys got everything today Was extremely nervous as you might have guessed. Gave everything a good wash first then got to it. Had some bother with ribbon wire so thought I'd try the small amount of wire that came with the fogger. Wrapped about 6-7 times around the wee screw driver that comes with it. Tried my best to fit the Ekowool but to no avail so pulled out some cotton I boiled last night, wicked her up and boom shackalacka it worked

Some slight gurgling after filling, not through the wee hole I took off the top part of the tank and filled while holding the glass to create a seal at the bottom.

All in all really impressed, lovely vapour production off my fairly wonky coil, nice taste tho I do think the custard I got needs to steep for a while. No dry burns thus far and only slight gurgling after filling which was fixed by turning upside down so no juice was near the wicks and taking a few puffs.

Shall do a bit more fiddling over the next few days but on first impressions this thing is amazing on the Nemesis clone I got today

 

[BAVapes]

@BAVapes How'd you get that to sit flush on the MVP?

http://www.planetofthevapes.co.uk/f...od-making_66/38913-made-my-mvp-flushhhhh.html