Glaz mini mtl advice

[big john]

28AWG round wire, either kanthal or stainless steel.

John will that be 2.5id or 3id mate please and wraps about 6/7

 

[rew]

John will that be 2.5id or 3id mate please and wraps about 6/7

2.5 ID works well.

 

[Mitz]

30X2/40?

Thank you. Corrected my post. Got 38 and 40 wrap so brain apparently got tongue tied.

Yes I understand mate I just wanted to try mtl and I'm struggling to find the right coil to get

Others will have their recommendations but personally I'd just starting off with mtl fused Clapton or simple round wire builds. 28 or 26 ga. Gonna have to play around to see what you like best. What one person likes, another can dislike.

For me tho, mtl fused Clapton for the win..

 

[big john]

I just use a reel of 27g kanthal round wire and put 6 or 7 wraps on. Nothing fancy is needed imo.

Excellent mate thankyou wasn't sure to get 27g or flat wire ill try the 27g thankyou

 

[big john]

Cheers mateill have a mess about

Thank you. Corrected my post. Got 38 and 40 wrap so brain apparently got tongue tied.



Others will have their recommendations but personally I'd just starting off with mtl fused Clapton or simple round wire builds. 28 or 26 ga. Gonna have to play around to see what you like best. What one person likes, another can dislike.

For me tho, mtl fused Clapton for the win..

 

[Deleted member 54254]

Or if you fancy something else.

https://naturevape.co.uk/collections/accessories-prebuilt-coils-ss316l

https://naturevape.co.uk/collections/accessories-prebuilt-coils-kanthal-a1

 

[dovpo_uk]

28AWG round wire, either kanthal or stainless steel.

Can’t go wrong with round wire.

 

[big john]

Or if you fancy something else.

https://naturevape.co.uk/collections/accessories-prebuilt-coils-ss316l

https://naturevape.co.uk/collections/accessories-prebuilt-coils-kanthal-a1

Thanks mate ill be looking at that once I know where abouts I need to be ohm wize

 

[Crispycritters]

Thanks mate ill be looking at that once I know where abouts I need to be ohm wize

As long as you're using a regulated mod I wouldn't worry too much about resistance - as long as the coil is relatively small and doesn't overheat the tiny deck the resistance shouldn't be an issue.

 

[big john]

As long as you're using a regulated mod I wouldn't worry too much about resistance - as long as the coil is relatively small and doesn't overheat the tiny deck the resistance shouldn't be an issue.

I'm just trying to figure out where I want to be thinking about it the only way is to try a few home made coils it's hard to explain I'm using the 0.17 alien coil in my rda which I'm enjoying obviously that can't go in the glaz so I'm like starting from scratch again for the mtl coil to find a sweet spot coil wise