help....rda

[johnbhoy]

guys- this might be too subjective but i'd like some advice with regards to rda's. I've only recently started using my drippers that i've stockpiled over the last year or so and must say i'm impressed so far so i thought i'd try going down the squonk road.

I have a velocity clone which has a BF pin and also just received the narda from FT. I'm waiting for a Pico Squeeze which i don't think is too far away. Checked all my other RDA's which i've not used yet derringer, stumpy, sapor, frreakshow mini and they obviously have solid centre posts due to their age.

However, i digress, my main quandry is that i'd like to make the most of new year at FT and have 4 in the basket and trying to narrow it down.

velocity v2 with glass
hastur V2
odis
hadaly

any thoughts on these above 4 guys.....most of the reviews i've read seem positive and i'm struggling to narrow it down. I nearly threw a Hobo in there as well......i know probably running before i can walk....like i said i know this prob very subjective but any opinions would be welcome.

All that i can add is that i'd be squonking initially on the Pico Squeeze and i'm a flavour chaser (obviously) and not too bothered about huge clouds!!

thanks in advance.

 

[nialb79]

I've got a tsunami 24 a hadaly and an O atty. Hadaly is perfect on the Pico squeeze. Trying to find a bf pin for the o atty as personally I find it a nicer draw than the hadaly tho

 

[nialb79]

Tsunami is good as well but it is a very tight fit on the squeeze

 

[EmbraSewerRat]

If you check thro FT you can find the BF conversion kit for your Sapor dripper..... Well worth investing in.

The Velocity will be like a usual Velocity I suppose, I wouldn't hold out hope on the glass cap surviving the trip from China going by my past experiences. It's a Velo, it does what it says on the tin.
The Hastur is OK, needs a lot of fannying about with to get it set up just right, but all in all it is ok.
Nivver had an Otis.
Hadaly is lovely. Stick a 3.5mm inner or larger single coil ( flattened nichrome if yir using a squeeze!) and off you pop. Don't block the airholes with wick!

24mm squonk atties will be tricksy to fit on a Squeeze. And not always all that worth the effort. But a 24mm Kennedy can be had for squonking and can be fun.

 

[smplmind]

FT do an O Atty with a squonk pin (got one). @johnbhoy if you have a hadalay and velocity with bf pins you should be okay for now.

 

[johnbhoy]

thanks for your input mate!!

haha...i'd totally forgotten about a possible width issue but it seems i'm ok as they're all 22mm. I shouldn't have forgotten this as my crown is tight as a gnat's on my normal pico.

on your other points- i looked at the tsunami too and that reviews well but would feel bad giving geekvape more cash without trying my griffin first.

the odis i have in the basket has a bf i think-

https://www.fasttech.com/products/6070300

my thinking is that i might ditch the velocity as i have one with a bf pin already although i don't think you can ever have too many of these lying about. i also think i'll go with the hadaly and it's a toss up between the odis and the hastur v2, bearing in mind i already have jsut received the narda!!

thanks again!!

 

[johnbhoy]

FT do an O Atty with a squonk pin (got one). @johnbhoy if you have a hadalay and velocity with bf pins you should be okay for now.

thanks mate.

 

[johnbhoy]

do we have such a thing as a list for compatible bt pins or do folks just trial and error......would be handy for all my unused rda's listed above.

 

[mannikon]

Pretty comprehensive

https://www.fasttech.com/forums/vapers/t/2267301/squonking-at-fasttech

 

[johnbhoy]

Pretty comprehensive

https://www.fasttech.com/forums/vapers/t/2267301/squonking-at-fasttech

thanks man.....already finding things like these pretty quickly.......https://www.fasttech.com/p/6050800