i have RDA hell vape passage

[nwhornet]

That will be why it's not firing as I reckon the coil is far too low for most mods... are you sure you mean 0.07

Some will fire down to 0.05ohm, especially in TC. Bust most are limited to 0.1ohm. If op is using premade coils at less than 0.2ohm each he'll be below 0.1 dual coiled.

i yous watts

Watts is power mode.
What resistance is the single coil.

 

[BigCloud]

Sorry?

he uses wattage

 

[Jaffacakes]

he uses wattage

Yeh I realised that after a minute...

Some will fire down to 0.05ohm, especially in TC. Bust most are limited to 0.1ohm. If op is using premade coils at less than 0.2ohm each he'll be below 0.1 dual coiled.

And yeh I didnt think about using 2 premade coils. So yeh I guess it is quite possible.

That's why a bit of ohms law is needed for rebuildables, not just for making your own coils

 

[anonyvape]

Some will fire down to 0.05ohm, especially in TC. Bust most are limited to 0.1ohm. If op is using premade coils at less than 0.2ohm each he'll be below 0.1 dual coiled.


Watts is power mode.
What resistance is the single coil.

they are 0.25ohm

 

[Jaffacakes]

they are 0.25ohm

There may be a slight variation on both coils (if its dual coiled). If they were both bang on 0.25 that would bring it down to 0.125 so very possible it's too low. Also will be lower still if you trimmed the coils down a bit too

 

[speedfreek67]

Or if they're Ni80 they will read low until they're bedded in and glowing evenly.

 

[xchrissyboix1997]

whats the best resistance of coils to buy for a dual coil build as i know the resistance halves

 

[Mr Ripple]

hi i just got the hellvape passage dual coil rda what would be the best resistance of coils to buy that i can use at a high wattage as i know it halves the resistance for example when you use 2 0.4 coils it would be a resistance of 0.2ohms

got the hellvape passage dual coil rda what would be the best resistance of coils to buy that i can use at a high wattage as i know it halves the resistance for example when you use 2 0.4 coils it would be a resistance of 0.2ohms

Looks like you have two accounts?
Pretty sure this isn't allowed @Miss Pepper

 

[xchrissyboix1997]

Looks like you have two accounts?
Pretty sure this isn't allowed @Miss Pepper

Its my partners account he has the same rda

 

[Jaffacakes]

Its my partners account he has the same rda

Ok still not sure why you need 3 threads for the same discussion though... and we have already made suggestions and have ignored us...