What's new

Innokin V3, CE5, What Voltage/Wattage?

blackburied

Member
Joined
Oct 15, 2013
Messages
5
Well.. I'm mega excited as its just arrived :) I've been tracking it on DPD this morning!

I've filled the clearomiser (2.4Ohm) to 1.6ml and its been sat upright for past 20minutes to let it all soak in.

My next question before I plug it all together.


What Voltage/Wattage would be appropriate to have it set on to start with?

Eyyy excited :) Thanks in advance
 
6 watts and go up till you get your sweet spot or get burnt then go back down

probably be about 7 to 8 watts
 
Cheers :)

What about the Voltage? Leave that right at the bottom too?

Backstory: Smoking Rollups for last 10+ years, I did try an e-cig about 5 years ago, but it was the cartridge ones with a bit of fluff in that you put the drops on.
 
run it in watts mode if you can it's better for new users :)
 
I run mine in wattage mode. I vape at 9.5 W. As the others say, start on the lowest setting and slowly increase until you are happy with the flavour and vapour production. If you get a burnt taste, reduce the setting until you are happy.
 
Well I've slowly clicked the wattage up a couple and I'm seeing how the flavour changes. Thanks a lot for your help so far, its making the move much easier!
 
Back
Top Bottom