Innokin Zenith Pro

[AJT]

The 4ml zlide is on pre ordet at fasttech for under £15
https://www.fasttech.com/p/9712525?...13-191025&utm_term=jack&utm_content=Promotion

Theres also a 3000mah 4ml zlide tube kit

You can get a 4ml d22 zlide now..
https://www.lepetitvapoteur.com/en/clearomisers/7397-zlide-d24-clearomiser-innokin.html

 

[Fuctifino]

You can get a 4ml d22 zlide now..
https://www.lepetitvapoteur.com/en/clearomisers/7397-zlide-d24-clearomiser-innokin.html

That is d24 not d22 - 24mm like the 4ml Zenith
(soz to be a bit anal but in case anyone ordered it expecting a 22mm tank)

personally - last week when they had the 4ml Zenith for £12 or €13 something
(that was a cracking deal, amongst others they had going)

Theres also a 3000mah 4ml zlide tube kit

looked at the tube & it doesn't seem as slightly tweak-able as Adept for other MTL stuff
It "seems" to auto set for 13w for above ohm, which might be OK for 1.2 Ohm coil inc
(but maybe a bit too much for say 1.6 Ohm stuff
& 16w for sub Ohm stuff which might be a tiny bit over for the 0.8 coil also included

That said, it might auto calibrate slightly, but no fine manual tuning like Adept

https://www.lepetitvapoteur.com/en/all-our-kits/7403-zlide-tube-kit-innokin.html
(which ain't a bad price for a 4ml Zlide tubey kit)

personally if tubes float your boat buy something like this maybe....

https://www.ecigone.co.uk/rincoe-mechman-80w-mod

 

[AJT]

That is d24 not d22 - 24mm like the 4ml Zenith
(soz to be a bit anal but in case anyone ordered it expecting a 22mm tank)

personally - last week when they had the 4ml Zenith for £12 or €13 something
(that was a cracking deal, amongst others they had going)



looked at the tube & it doesn't seem as slightly tweak-able as Adept for other MTL stuff
It "seems" to auto set for 13w for above ohm, which might be OK for 1.2 Ohm coil inc
(but maybe a bit too much for say 1.6 Ohm stuff
& 16w for sub Ohm stuff which might be a tiny bit over for the 0.8 coil also included

That said, it might auto calibrate slightly, but no fine manual tuning like Adept

https://www.lepetitvapoteur.com/en/all-our-kits/7403-zlide-tube-kit-innokin.html
(which ain't a bad price for a 4ml Zlide tubey kit)

personally if tubes float your boat buy something like this maybe....

https://www.ecigone.co.uk/rincoe-mechman-80w-mod

Nice one never even noticed..just saw D and assumed..so D24 even better I guess

 

[Frogprince]

P Busardo - Introducing The Zenith Pro

 

[AJT]

I’m really looking forward to getting my hands on the zenith pro..

Contacted innokin UK ref the pro landing and got this reply

Unfortunately, the Zenith pro tank is not available at the moment in the UK.
We are expecting it to come within the next 4-5 weeks...
Think we were told the same 4-5 weeks ago..

 

[Tootlevape]

Seems to me to be over complicated for what is essentially a clearomiser.
"Vape band" to hold the glass in place, spring loaded coil so that you can turn it upside down when changing the coil (who would want to do that?), Juice shut off when refilling ( simply close your air flow like you do on any tank when refilling and you won't get leaking or gurgling). KISS mr. Phil, there is too much to go wrong imho. I'll stick with the Zlide d24 for my clearo vape.

 

[AJT]

Yes not at all bothered about the vanity bands etc but like the other stuff like juice locks and air control and glad it’s compatible with existing coils as I have loads of 1.6ohm and that the non tdp is a 5.5ml...will get 2 or 3 when available outside uk.

 

[rew]

Pro is available for pre order on 3fvape, but estimate is 20th December.

 

[MiscoDatt]

 

[MiscoDatt]

I’ve Snaffled up a zlide for £8 in the sales. Thought I’d give it a try as I quite fancy one of these for when I’m away due to the big capacity. Which of the coils is most recommended? I’m thinking 1.2 ohm or maybe the .8ohm?