Just watched Scott's latest vid using a micro coil

[whipitup]

Here:

http://www.planetofthevapes.co.uk/forums/showthread.php/17532-Review-of-The-H-Atty-Micro-Coil-Setup

And just had to try it on my AGA-T2

Not perfect (needs less wraps) but probably the best vape I've ever had from that atty.

One thing to watch though, the top cap gets very warm - maybe due to the too many wraps and having to run it at 11w!!!

I'll have another go in daylight so I can see what I'm doing properly.

 

[Dan Dan the vaping man]

Let us know how you get on with your t2 as mine has been sitting lifeless for months after giving up with hot spots/legs etc so this looks worth a go

 

[whipitup]

Will do fella.

 

[Colonelboom]

I did a micro coil on my vivi nova last night too, vapour is smooth but I think, like you, that I put too many coils on as production is slow to get started. Too slow for me at least.

 

[Mawsley]

Let us know how you get on with your t2 as mine has been sitting lifeless for months after giving up with hot spots/legs etc so this looks worth a go

How about a dual silica wick or a silica U-wick?

I've had success with both of them before...and with another T2 shortly on its way I'll be having one of them as a ribbon 1ohm dual-silica for certain.

 

[Merino-Teflon]

I'll be trying dual microcoil silica wicks soon enough, cannot the wait, shall report my findings.

 

[ScottChensoda]

This one was made using 0.3mm kanthal this evening. Seems to work ok but it's over-wicking a touch.

 

[clint]

I had a do today with a micro coil. What's the crack with the coils having to touch tho? I always thought that you had to space out the coils a bit to make sure that they're not touching. Anyway, I wrapped my coil nice and tight round a precision screwdriver, all nice and bonny then flamed it with the blow torch to keep them in place. Then I threaded some 2.5mm silica through the middle and assembled it on my igo w which then resulted in the coils separating themselves slight anyway.

I must say tho that the vape is good. Definitely on a parr with my sub ohm coils, and like others have said it is a "smooth" vape. It's hard to explain but you'll know what I mean if you try it.

Next time I do it tho I'll attach the coil to the atty before I thread the silica through.

 

[Dan Dan the vaping man]

Yeah might have a go, just gotta smash the post out to accommodate for some silica but my kayfun should be hear tomorrow so will probably be loving that of for a while but good idea for go if I fancy hurting the t2 like it deserves lol

 

[whipitup]

This one was made using 0.3mm kanthal this evening. Seems to work ok but it's over-wicking a touch.

RSST?

Seems to be working well!!