kaplan
Achiever
- Joined
- May 10, 2015
- Messages
- 1,453
Today my only genny the Nextiny clone by SXK kept shorting, I think there is a problem with the insulator.
So I decide to practice my mesh build on my Piccoloid 2.
Here is what I got. On the hind sight I should have taken more photos.
I used one of the In'ax MII tutorials as a guide. I think this one is called straw in straw. I will get with the mesh lingo hopefully as I progress.
The only mesh grade I have at the moment is 200sf so that was applied for both straws.
The dimensions for the inner straw is 20x10 and that was rolled with In'ax MII stick
The dimensions of the outer straw is 30x18 which was rolled on Nextiny rolling pin.
I then wrapped 28g KA1 on the outer straw.
Then applied this in the deck, removed the rolling pin and insert the inner straw.
The wraps could be tidier but I didn't want to fiddle too much as I wanted this first build to succeed.
I cut the straws in line with the deck, placed the top cap and rest his history.
It is wicking extremely well and there is no gurgling or a leak.
The flavour is getting stronger with each draw and I have reasonable vapour production.
I love mesh!
So I decide to practice my mesh build on my Piccoloid 2.
Here is what I got. On the hind sight I should have taken more photos.
I used one of the In'ax MII tutorials as a guide. I think this one is called straw in straw. I will get with the mesh lingo hopefully as I progress.
The only mesh grade I have at the moment is 200sf so that was applied for both straws.
The dimensions for the inner straw is 20x10 and that was rolled with In'ax MII stick
The dimensions of the outer straw is 30x18 which was rolled on Nextiny rolling pin.
I then wrapped 28g KA1 on the outer straw.
Then applied this in the deck, removed the rolling pin and insert the inner straw.
The wraps could be tidier but I didn't want to fiddle too much as I wanted this first build to succeed.
I cut the straws in line with the deck, placed the top cap and rest his history.
It is wicking extremely well and there is no gurgling or a leak.
The flavour is getting stronger with each draw and I have reasonable vapour production.
I love mesh!
Last edited: