Mod Building process and Pictures

[Aldin Mods]

Hi my name is Aldin, i am from Bosnia and Hercegovina and i have been making mods since 2014.
In this Thread i will be posting update pictures of the mod that i am currently working on and i will be showing you how the mods take shape. Ill start with the mod that is almost finished now.
Its a DNA 75c single 18650, the goal for this mod was to have it small as possible (the mod measures 75mm high,40mm wide,and 25mm thick. The mod is made from African Kingwood which is one of my favorite natural wood types.

 

[Aldin Mods]

I milled out the block for the battery,and the position of the board ,also i wanted a removeable faceplate since the Screen and adjustment buttons will be hidden behind the faceplate.

 

[Aldin Mods]

Now it was time to work on the topcap and bottom cap ,i needed to figure out how to make the contacts then solder everything.i also inlayed the screws and nuts which where crazy small i think the screws a mm1.5 , also i drilled the hole for the 510 (stealthvape black 510) and positioned it in the topcap. I also got the board secured in place.

 

[Aldin Mods]

In the next few days i drilled the fire button hole,then sanded the mod to shape ,added the screen and adjusted the underside of the faceplate to have everything fitting perfectly.

 

[MajorVape]

I really like that African Kingwood, the wood grain lines are so straight.

 

[Genghis Fogs]

Looks beautiful

 

[rew]

Great work. Love seeing a progress build.

 

[Aldin Mods]

And here we go ,the mod is completed dna 75c 18650 , 75mm tall/40mm wide/25mm thick.

 

[Genghis Fogs]

Most of your pictures haven't loaded properly. But from the two that have, your work looks incredible.

 

[rew]

Gorgeous dinky little mod