Firstly, Hello.
I've been vaping for many years and have always come to this site for the great advice and feedback and I finally need post to maybe get some opinions.
For the last couple of years I have settled into making my own juice recipe and using an Aegis Legend (awesome btw) with a Tigon tank and 1.2ohm coils. I vape arround 7.8 watts as my juice is 80%PG due to a bit of an intolerance to VG.
So I thought I'd upgrade my mod and grabbed a legend 2 from vapeclub.co.uk.
Problem is, straight away it started really burning my coils. Twice I even saw it burn so hot the coil lit up bright red like there was an LED in my tank.
Sometimes I'd get a steady vape, then a while later it would burn again.
I tried in both power and variable curve mode but same issues and tried coils from different packs.
I'm guessing its faulty but I'm a little concerned as the feedback on the phone with Vapeclub was that 'it must be my coils' even though I was swapping the tank over to my Legend 1 and it was working fine as always so if its something I'm missing I'd rather figure it out before sending it off for them to check out.
Has anyone had any issues like this or maybe know of something that might cause this?
I though maybe it might be a preheat/boost setting but I went through the whole menu and couldnt find anything.
(BTW off topic, but it looks like the Nautilus 3 has a similar design to the Tigon which I really like so thinking of trying that and their 1 ohm mesh coils.)
I've been vaping for many years and have always come to this site for the great advice and feedback and I finally need post to maybe get some opinions.
For the last couple of years I have settled into making my own juice recipe and using an Aegis Legend (awesome btw) with a Tigon tank and 1.2ohm coils. I vape arround 7.8 watts as my juice is 80%PG due to a bit of an intolerance to VG.
So I thought I'd upgrade my mod and grabbed a legend 2 from vapeclub.co.uk.
Problem is, straight away it started really burning my coils. Twice I even saw it burn so hot the coil lit up bright red like there was an LED in my tank.
Sometimes I'd get a steady vape, then a while later it would burn again.
I tried in both power and variable curve mode but same issues and tried coils from different packs.
I'm guessing its faulty but I'm a little concerned as the feedback on the phone with Vapeclub was that 'it must be my coils' even though I was swapping the tank over to my Legend 1 and it was working fine as always so if its something I'm missing I'd rather figure it out before sending it off for them to check out.
Has anyone had any issues like this or maybe know of something that might cause this?
I though maybe it might be a preheat/boost setting but I went through the whole menu and couldnt find anything.
(BTW off topic, but it looks like the Nautilus 3 has a similar design to the Tigon which I really like so thinking of trying that and their 1 ohm mesh coils.)
