My new toy

[Mr.Motivapr]

So with the Squape I was waiting for going belly up, I decided to go for an alternative.

I went for:




Copper Viggo Mech and an Orchid V3.

Both from Elegant Vapour.

The Viggo looks the tits being 22mm and with the SS switch and top cap it will go with all my atties.

Had all 3 tubes, 18350, 18500 and 18650.
Lovely switch, buttery smooth like the threads.

The top cap has an adjustable pin and also adjusts for battery rattle, my favourite type as you can get everything flush with no gaps.

The orchid, well where to start.
It's a beast!!
Raguri was spot on and it's now my favourite atty.

Chucked a 0.5ohm build in, so easy to build with the quad post design.

And it chucks clouds like an RDA.

Definitely cure the shinyitis for a bit (probably not but wishful thinking )

 

[Raguri]

Mr.Motivapr

Oh yeeee of little faith...

 

[Mr.Motivapr]

Mr.Motivapr

Oh yeeee of little faith...

You never disappoint Rags.

So glad I bit the bullet on this one.

It's a very standard dual microcoil and the plumes are insane!!

 

[BD1]

Got 0.25ohms in my Orchid V3, only downside is the juice capacity, i'm filling it up every 5 minutes because it burns through so much juice.

Bring on the Orchid V4, it'll be endgame for rebuildable tanks.

Raised airholes to make it newbie friendly (harder to flood)

Can't wait for this!

 

[Mr.Motivapr]

Got 0.25ohms in my Orchid V3, only downside is the juice capacity, i'm filling it up every 5 minutes because it burns through so much juice.

Bring on the Orchid V4, it'll be endgame for rebuildable tanks.

Raised airholes to make it newbie friendly (harder to flood)

Can't wait for this!

Looks beast mate

 

[G60]

Thinking of getting one of these. Have you got in in Dual Coil mode?

 

[Ment]

With votes from two such forum stalwarts I'd better put one on my shopping list.

 

[Ment]

Can't wait for this!

They've got them here:


Tobeco Orchid V3 and V4 clone

 

[Mr.Motivapr]

Thinking of getting one of these. Have you got in in Dual Coil mode?

Yes mate, have to use in dual coil mode or cover an airhole

With votes from two such forum stalwarts I'd better put one on my shopping list.

Yes you are missing out buddy

They've got them here:


Tobeco Orchid V3 and V4 clone

Well spotted bud.

I have had bad experiences with Tobeco so I will wait for the Ivogo version.

I'm using the Ivogo V3 and it has the raised airholes like the V4.

Drinks juice though, RDA style

 

[BD1]

They've got them here:


Tobeco Orchid V3 and V4 clone

Ohh many thanks! bookmarking that, doesn't say if they're in stock though, could be waiting weeks...

Anyhoo need to raise some funds now