What's new

Need help with settings on my mod!

Cloudsong

New Member
Joined
Jan 12, 2025
Messages
1
Hi all! New to this site but not to vaping. I recently was gifted a Vaporesso Tarot Nano (just the mod minus a tank and coil) and I have never used one before. I am using a tank and coil that I already have. Seems to work ok but the problem is with the mod. I cannot figure out how to turn it down! It’s on 60 w and for me that is WAY too high. I press the buttons and nothing happens. The mode button works and I can go between the temp setting and the TCR m1 and m2 and then the BYPASS. I’ve never used a mod with BYPASS on it, not to my knowledge. Can anyone help me figure out how to turn it down? What am I doing wrong or not doing? Thanks!!
 
Hi @Cloudsong and welcome to the planet.

As shown on guide above, the 3 buttons at the bottom you need to press the top left one to turn it down.
also the setting need to be sett to wattage/power mode and NOT tc or bypass as most standard coils cant use these settings.
press bottom button until it shows wattage or power. if the buttons wont turn the wattage up/down the screen could be locked and depending on mod its either 3 fast clicks of fire button or 5 clicks but this may not work on that mod and as ive never used one before its a guess.
 
Not sure if this has been solved. But sounds like your locked. Press and hold mode and + for about 2 secs. It'll say unlocked or something like that. Can't fully remember as been ages since I used that mod.

Top left and bottom button. Then you just spam the up and down buttons to your hearts content. Also the same again to lock it.
 
Back
Top Bottom