Nemesis top cap/510 connection

[oldhippydude]

PTFE Tape works as a workaround.

I new it was four letters.Just got the wrong ones.
Thanks.

 

[Tubbyengineer]

Evening all.

After a wee incident involving not locking off the switch and resulting in the ruination of my beloved Mephisto V1 and a damned good VTC4 I have finally cleared the crap and smell off the Nemesis.

But, the delrin insert to the top cap that holds the 510 connection screw is loose and won't re-seat in the brass part.

So, what glue could/should I use to re fit it?
Or would a wee bodge of sparky tape round the delrin part be alright?

I would add pix but camera on phone is being difficult.

Time to upgrade to the floating connector - 5 Euro's from Atmomixani - https://eshop.atmomixani.gr/en/nemesis-supplies/635-floating-contact-set-for-nemesis-ssbrass.html or this one if your's is a flat top - https://eshop.atmomixani.gr/en/nemesis-supplies/637-floating-contact-set-for-flat-caps.html

 

[Bbuck27]

Evening all.

After a wee incident involving not locking off the switch and resulting in the ruination of my beloved Mephisto V1 and a damned good VTC4 I have finally cleared the crap and smell off the Nemesis.

But, the delrin insert to the top cap that holds the 510 connection screw is loose and won't re-seat in the brass part.

So, what glue could/should I use to re fit it?
Or would a wee bodge of sparky tape round the delrin part be alright?

I would add pix but camera on phone is being difficult.

Ive used ptfe tape on my stingray and pazer mechs and had no trouble at all had to use it on the switchs as they came loose to easy