RDA Questions :)

[Zited]

Hello im new too the site and I have a few questions for you more, "advanced" vapers if you could help , so i've been vaping for years now but only recently got into the RDA side of things as I have seen so much good stuff about it, although, here's the issue

When i first got it they shop showed me how to build etc and it tasted unbelieveable, but when i attempted it myself for the first time it tasted Nothing like it did that day and ever since then I have never been able to master the unbelieveable flavour that shop managed too produce for me

I have a Vaporesso Gen mod with a Drop Dead RDA normally .2 ohm coils vaping at around 50-70 watts Im never too sure what the watts should be,

Any help would be appreciated and thanks for letting me join the forums!

 

[WASD in Blue]

Hi Zited and welcome to POTV Forums, to help we need to know a bit more ...

What Wire are you using (are you making your own coils)
What Wicking are you using
What Juice .. inc PG/VG

 

[RAPTOREX]

Hello im new too the site and I have a few questions for you more, "advanced" vapers if you could help , so i've been vaping for years now but only recently got into the RDA side of things as I have seen so much good stuff about it, although, here's the issue

When i first got it they shop showed me how to build etc and it tasted unbelieveable, but when i attempted it myself for the first time it tasted Nothing like it did that day and ever since then I have never been able to master the unbelieveable flavour that shop managed too produce for me

I have a Vaporesso Gen mod with a Drop Dead RDA normally .2 ohm coils vaping at around 50-70 watts Im never too sure what the watts should be,

Any help would be appreciated and thanks for letting me join the forums!

Could you photograph your build, please?
A common mistake, made on the Dead Rabbit, it to set your coils too high. It's important they are held against the deck, as you tighten the coils. I mean literally so the coils are touching the build deck. Once the grub screws are tight use a coil rod or correct sized screwdriver, to lift the coils up, so the will not short.

 

[Zited]

Here is a picture of my build.
https://prnt.sc/rhwd6l

 

[Zited]

What Wire are you using (are you making your own coils) : No I am using pre built coils ranging from .2 - .4 ohms clapton coils
What Wicking are you using : Cotton bacon or else Cotn Threads
What Juice .. inc PG/VG : A mixture of flavours brand atm is Love Da Vape, and almost all my juices are always 70/30

 

[Mitz]

What Wire are you using (are you making your own coils) : No I am using pre built coils ranging from .2 - .4 ohms clapton coils
What Wicking are you using : Cotton bacon or else Cotn Threads
What Juice .. inc PG/VG : A mixture of flavours brand atm is Love Da Vape, and almost all my juices are always 70/30

Welcome to the forum.

You don't need to type out people's questions. Just hit the reply button and their entire post will be quoted in the text box. Just write your reply underneath. If you want to quote multiple people just hit the quote button on each message you want to reply to then hit insert quotes button that appears at the bottom under the text box.

Try moving the coils closer to the airflow vents. You want to have the coils so the airflow is lined up with the bottom half of the coil if you look into the rda thru the air vents.

 

[WASD in Blue]

Welcome to the forum.

You don't need to type out people's questions. Just hit the reply button and their entire post will be quoted in the text box. Just write your reply underneath. If you want to quote multiple people just hit the quote button on each message you want to reply to then hit insert quotes button that appears at the bottom under the text box.

Try moving the coils closer to the airflow vents. You want to have the coils so the airflow is lined up with the bottom half of the coil if you look into the rda thru the air vents.

Exactly

 

[Zited]

Welcome to the forum.

You don't need to type out people's questions. Just hit the reply button and their entire post will be quoted in the text box. Just write your reply underneath. If you want to quote multiple people just hit the quote button on each message you want to reply to then hit insert quotes button that appears at the bottom under the text box.

Try moving the coils closer to the airflow vents. You want to have the coils so the airflow is lined up with the bottom half of the coil if you look into the rda thru the air vents.

Oh woops haha thank you