Reuleaux r2/3 repair time again...

[didilo]

Thanks nick, this is as far as I've got, don't know if you can see the pic, the thin red wire that goes from under the usb port up towards the top of the mod has come undone. Can't seem to see where from though? Poxy autospell, meant Jock of course!

 

[didilo]

Thanks nick, this is as far as I've got, don't know if you can see the pic, the thin red wire that goes from under the usb port up towards the top of the mod has come undone. Can't seem to see where from though? Poxy autospell, meant Jock of course!

Edit, just had another look at your pic, think I get it now mate. Just got to get myself a soldering iron and have a go. Just need a nimble fingered Chinese to put it back together ha! Quite enjoying it really, I normally cut wood. Thanks again for your help all.

 

[nwhornet]

Video here for the red wire fix http://explicit.si/en/detailed-guide-on-how-to-fix-wismec-reuleaux-rx-23-check-battery-problem/

 

[jock1092]

Thanks nick, this is as far as I've got, don't know if you can see the pic, the thin red wire that goes from under the usb port up towards the top of the mod has come undone. Can't seem to see where from though? Poxy autospell, meant Jock of course!

The thin red wire attaches at the top of the battery tray like in the picture I showed
Should have said you don't need to remove the entire tray just reattach it on the top positive terminal on the sled

 

[didilo]

Video here for the red wire fix http://explicit.si/en/detailed-guide-on-how-to-fix-wismec-reuleaux-rx-23-check-battery-problem/

Cheers for that mate, I'll have a look tomorrow. It's FRIDAY NIGHT woooo! Got some sounds on now and thinking about women!

 

[didilo]

The thin red wire attaches at the top of the battery tray like in the picture I showed
Should have said you don't need to remove the entire tray just reattach it on the top positive terminal on the sled

No worries mate, I should have done a bit more research, that video that was posted was ok but the Dutchman? fast forwarded the bits I wanted to study! Hey! I've got a box of bits that have a chance of going back together, I'm happy enough.

 

[packrat]

Can't do TinyPic on mobile data but the red wires in this pic
The thin one is usually the culprit as that shiny solder is the result of me redoing it after the original joint snapped off

And there plenty of utube vids that take you through it step by step. Just don't give up yet!

 

[jock1092]

And there plenty of utube vids that take you through it step by step. Just don't give up yet!

Mines working now, it was for didilo as a reference to which one I meant needed looked at

 

[packrat]

Mines working now, it was for didilo as a reference to which one I meant needed looked at

Great! I am about half asleep. I had a 200s die and i replaced the board with a dna 250. Really love it now!