Squonk Check

[Clonfuddled]

Who said size matters 14 mm NoName on the ram with twisted

 

[mannikon]

24.5mm wide, deep juice well, mid airflow, easy to coil, comes fitted with bf pin, solid construction, 810 drip tip with PEI tip included (quite a decent one), PEI heat disc on the bottom, 510 pin just right, neither too short nor too long

vapes extremely well, good vapour and decent taste, unusual posts but easy to use and can be single or double coiled

comes in either all stainless steel, brass/steel or copper/steel

Fasttech and 3vape have them, maybe others

about seven quid and it's not a clone

https://www.fasttech.com/products/3028/10038396/8337901

http://www.3fvape.com/rebuildable-a...opper-copper-245mm-diameter.html#.WbRSurKGOJA

 

[joe clay]

Had a broken dripbox and a broken aspire plato, so bits from the dripbox was added to the plato and now have another squonker with 50w tc.

Just got to cup hole for bottle squeezing

 

[Simmo961]

Just playing around with two cheap Boxer clones.

 

[mannikon]

very tasty

 

[Simmo961]

very tasty

View attachment 138527

What build do you have in there, I just can't get decent flavour out of the rabbit. Not sure of its coil or coil position that's the issue for me. All the hype suggests it should be better than a Pulse 24.

 

[mannikon]

What build do you have in there, I just can't get decent flavour out of the rabbit. Not sure of its coil or coil position that's the issue for me. All the hype suggests it should be better than a Pulse 24.

At the moment, my Pulse 24 with a single coil beats my Rabbit with dual coils, tiny pair of SS 2.5mm ID claptons 0.5 from UD but added an extra full wrap so comes in around 0.3 for the pair cold and kept the coils relatively low as the (almost) top AFC slants down.
With better and slightly larger coils and a bit higher it may match the Pulse 24. Will try some Ni80 aliens or staples, 3.5mm ID may fit.
As it is, combination of vapour and flavour is impressive. No leaks of course and plenty of juice room though wish it had more wiggle space for wick.
Stays cool at 50W.
I like the deck, not a postless but horizontal posts so you can trim excess wire underneath, clever.

 

[mannikon]

Sorry, pics:

 

[Simmo961]

At the moment, my Pulse 24 with a single coil beats my Rabbit with dual coils, tiny pair of SS 2.5mm ID claptons 0.5 from UD but added an extra full wrap so comes in around 0.3 for the pair cold and kept the coils relatively low as the (almost) top AFC slants down.
With better and slightly larger coils and a bit higher it may match the Pulse 24. Will try some Ni80 aliens or staples, 3.5mm ID may fit.
As it is, combination of vapour and flavour is impressive. No leaks of course and plenty of juice room though wish it had more wiggle space for wick.
Stays cool at 50W.
I like the deck, not a postless but horizontal posts so you can trim excess wire underneath, clever.

Many thanks for your reply. My findings are pretty much the same. Pulse 24 single coil beats the rabbit. I must admit though I have yet to put any kind of beefy coils in the rabbit.

 

[tootingyoda]

Cheap and cheerful boxer clone, much improved after I attacked it with the dremmel. MM 510 and squonk bottle fitted, and connection tweaked so I feel a bit safer with this now. Oh and the switch lock still works too.