Tank wobble

[robb1977]

On my vamo I am using a carto in a DCT tank. When its on the vamo there is a slight wobble as I can't tighten it up properly as the tank will spin on the carto. Is this normal? Or should it go on tight?

 

[Markfletcher007]

Well it should be tight but remember its only held in place by the o rings so if you are tightening it up and it bottoms out on the vamo it will Spin as the o rings would be the weaker of the points

 

[ZT]

Rob if the drip tip is nice and tight press against the drip tip with you finger as you turn the tank, should get it a bit tighter

 

[Lord Grim]

As long as it is tight enough, I wouldn't worry. Remember, you shouldn't do your tank up too tight anyway cos it could damage your kit. If it's bugging you though, use a pair of long nose pliers on the lip of the carto where it hangs out of the top of the tank.

 

[Mark]

Rob if the drip tip is nice and tight press against the drip tip with you finger as you turn the tank, should get it a bit tighter

My words...your mouth

 

[robb1977]

Rob if the drip tip is nice and tight press against the drip tip with you finger as you turn the tank, should get it a bit tighter

Pressing my finger against the tip seems to have gotten it nice and stiff haha

 

[Tony]

Pressing my finger against the tip seems to have gotten it nice and stiff haha

Yes, that generally works with most things.

 

[Vape-space]

Yes, that generally works with most things.

haha