Tester wanted for: SERIES B DNA 75 (new sandstorm 25mm version)

[Slanger]

Tried on a set of SS316 staples fused claptons and this is the only mod that will use them in TC. Eleaf, Smok, Joytech, someothers I cant think of just revert back to wattage. So I can see why those who TC use a DNA board.

 

[red5]

@cindy99 try putting it through escribe. Mine needed a service pack update (a firmware update) and I used to have the same problem with 0.6 ohm coils on older firmwares.
@Tubbyengineer has also posted an .ecig file earlier in the thread with the correct internal resistance and case thermal settings. Use the DNA 75c version of escribe to put that on the mod.
My experience of dna75 mods with TC in SS316L is that it works best between 0.3 and 0.5 ohms.

 

[cindy99]

Thanks for the help @Benjamin Bailey and @red5, looks like I'll have to dig my 'puter out to load Tubby's files and get eScribe up n running...I wonder where it is? Haven't used it in over a year! [emoji38]

 

[killgore]

Ah it's not just me then
I've not tried tc before,so I made some as coils .5, watts at 50 temp at 460 ....meh! an insipid
Vape. Upped the temp to 560
And no better. very cold and lacking anything.
I was using as sxk hadaly and bunkr fruit creme

 

[killgore]

Ah it's not just me then
I've not tried tc before,so I made some as coils .5, watts at 50 temp at 460 ....meh! an insipid
Vape. Upped the temp to 560
And no better. very cold and lacking anything.
I was using as sxk hadaly and bunkr fruit creme

Ps
Fuckin banging with tanks on wattage though

Thanks for the help @Benjamin Bailey and @red5, looks like I'll have to dig my 'puter out to load Tubby's files and get eScribe up n running...I wonder where it is? Haven't used it in over a year! [emoji38]

 

[Tubbyengineer]

Anyone using TC yet? Been trying with a 0.6ish ohm SS316L stock coil - which works perfectly on my eVic mini - and preset 3 with no joy at all, it just jumps from my set temp (210C) to OFF on the screen and fires in power mode.

I've adjusted the watts - after a bit of googling to find out how to do it! - in temp mode from my usual 27w up to 60w with no difference. It returns to showing the set temperature once I stop firing.

I've not connected it to eScribe yet, is that my only recourse?

Sorry to tag you @Tubbyengineer, any tricks I'm missing?

If it's not in the correct Material setting then it will need to be changed - as if it doesn't see the correct resistance change you'll get exactly the behaviour described. Make sure the Temperature or power is locked (depends on which is dominant - whichever one is in big numbers) then double click either up or down - this will get you into the Profile selections, use up or down to scroll through to the SS316 profile - there should be on OOB, then press fire to select - make sure the atty is cold when you first fire it so that you get the right resistance set too.

If that doesn't work then you have a problem with either your coil or the connection to the mod...

 

[Tubbyengineer]

Ah it's not just me then
I've not tried tc before,so I made some as coils .5, watts at 50 temp at 460 ....meh! an insipid
Vape. Upped the temp to 560
And no better. very cold and lacking anything.
I was using as sxk hadaly and bunkr fruit creme

Too much wick - Less cotton should sort it, you need only a slight resistance to the cotton as it pulls through the coil...

 

[Slanger]

Jack Frost meet Jac Vapour

 

[killgore]

Too much wick - Less cotton should sort it, you need only a slight resistance to the cotton as it pulls through the coil...

Ive rewicked it and there is no resistance when pulling wick yet it still seems to be lacking any substance
When you say atty should be cold you mean just at room temp,not straight out of the fridge or after its been fired on a mod

 

[jman316]

Woah...I just had to empty a tank. After I put it back on the mod...it asked me if I had replaced the coil? I've never seen that before. That has made me happy [emoji3]