Darthpistachio
Postman
- Joined
- Dec 12, 2012
- Messages
- 350
Has been modded to a 1.7 mm air hole - so therefore a bit more airy and looser draw than standard.
Stock allen screws for attaching wires are pretty poor - have been replaced with suitable stainless screws - to show there are no connection/shorting issues I have connected small piece of Kanthal and shown on a meter - it if bothers you still then grind down the screws or replace with suitable ones - but I have had no issues with it - of note though with all vicious ants - do not use drips tips with long connection pieces or you run the risk of shorting the drip tip onto the top of the positive pole - this is an issue with ALL of these atomisers -
£45 new last week! - Now £36 with discount codes this week !
Would like £32.50 Delivered - recorded post in the UK
Cheers
Stock allen screws for attaching wires are pretty poor - have been replaced with suitable stainless screws - to show there are no connection/shorting issues I have connected small piece of Kanthal and shown on a meter - it if bothers you still then grind down the screws or replace with suitable ones - but I have had no issues with it - of note though with all vicious ants - do not use drips tips with long connection pieces or you run the risk of shorting the drip tip onto the top of the positive pole - this is an issue with ALL of these atomisers -
£45 new last week! - Now £36 with discount codes this week !
Would like £32.50 Delivered - recorded post in the UK
Cheers
Last edited:
