chubbaduckie
Achiever
- Joined
- Mar 8, 2016
- Messages
- 2,166
^^ pretty much this^^Welcome to #mechlife sparky!!
First off, you'd be well advised to check if the brass contact, when it touches the 510 to make a circuit sparks. This will be a bit iffy and need a bit of fiddling and metal bending to make the thing work better and safer. I've had to temporarily bin a boxer clone due to this.
And make sure you swab and polish the metal contact when the device arrives!! A wee swab with metal polish or some isopropyl alcohol will be a good start.
Oh, and check the bottle and cap fit securely so no air escapes twixt the bottle threads s that'll make actual squonking a nightmare.
Now, on tae the Wasp. The wee blighter likes a chunkyish coil. I use flattened 23g Nichrome ( look for Brochrome on Stealthvape!!) and 5/6 wraps with 3mm inner fills the chamber nicely and comes to ~0.35ohms. Nice warm tasty vape.
Did try a fancy fused clapton thingummy, but way too warm for me. Do mind that what i think is finest kind will most likely not be your poke of chips.
But, generally, going by the patter on here, a 0.3-0.4 ohm sizeable coil will be peachy keen.
You wont go wrong with the wasp mate, ive got a spaced fused clapton 3mm on my runt/wasp nano combo and the vape is amazing. I also use brochrome from stealthvape.
As always with mech clones please please check and clean all points of contact, check battery wraps for dings and nicks, if you have any doubt about a battery wrap just rewrap it abd be safe it literally takes seconds.
Happy vaping buddy stay safe.[emoji36][emoji100][emoji100][emoji100]
Edit: Tag for op @Billy_