Well I was wrong Flavour Vapor
&
Vape Club doing this kit @ £41:99
https://www.vapeclub.co.uk/vape-kits/innokin/adept-zlide
The zlide works well - but I think I prefer the Zenith 4ml
(taste is not quite as good but hand on heart I never rinsed the tank so might be subdued or minor tang)
Not truly fair to knock it coz not feeling the 101% reat taste yet, as I never washed the tank prior to use
BUT - reason I prefer the Zenith all things being equal.....
Just easier to fill by twisting open, no pulling tip up or removing it
plus as said 4ml Zenith is larger capacity - so less refilling or messing with drip tip
Oddly enough, the spare drip tip supplied with Zlide is regular drip tip without the lug that locks lid
in fact it is the exact same straight std drip tip the Zenith comes with
Odd they supplied a the Zenith tip, that won't lock the lid, considering the banged on about this
is the mod usable with other stuff - YES
I use a 1.4 Ohm coil at 10.8~11w on my Hastur
so plopped it on the Adept mod - left coil light lit up = above Ohm coil detected
(the guide to lights is on bottom)
so I have 11w 12w 13w or 14w with all bars lit on power setting
(on sub ohm it is 14, 15,16 & 17w max settings - which correlated with the 0.8 one I put it in the zlide)
Well on the one light 11w it wasn't quite right, lack of similar subtle sizzle gave it away on firing
and taste was lacking - so needed 2 lights-12w to get the same flavour
BUT IT DOES WORK WITH MY HASTUR 3.5ml
So yes, I'm wrong again - the mod is adept/adaptable for similar mtl's on a 11w to 17w range perhaps
(maybe 16w as my hastur needed an extra watt to fire properly, than the indicated 11w on the mod)
Yeah, mod is good, the rubbery is slightly smooth - could have been knurled or textured slightly
it felt too smooth but very comfortable - bit taller than I'm used to
not as wide as Kroma but a bit taller & feels a tiny bit lighter - though not weighed it
edit - I'm wrong again ffs....
Adept mod = 152.63g
Kroma mod = 141.4g
or
Kroma (slipstream version with adaptor) = 151.5g
so a tiny tiny smidge heavier (1g to 11g depend on Kroma version)
ahh fuck it - it's about the same or near enough
(Zlide is about 4g lighter than Hastur, but dunno why I said this or that was lighter
think I need to change my medication - I'm not on any, maybe I should be)
Here's a pic with a 24mm tank Hastur 3.5ml, could easily fit a 26mm tank on there, maybe a 27~28mm tank
before you notice it overhanging, 30mm would overhang but the textured shoulder will nearly get away with it
Yes up to 28mm tank on 510 base plate
or 30mm on rubber shoulder - just measured it
soz pic is a bit shit
Think the Zlide will end up going on a coolfire mini mod (sexy little bit of kit)
& plop a 4ml Zenith or a Hastur on there as it fits on there easily
Thing to bare in mind is usb is on bottom, than on front/side like many others
need to remove rubber bung/cap to gain access to usb
so charging means tank is tilted on its side or propped upright whilst charging
(I removed the tank & vaped the Hastur on Kroma)
But Zlide/Zenith's are pretty good if they lay on their side a bit - other tanks can flood
Think I might have preferred the usb at front/back/side to charge standing upright
Unsure on battery life from this 3000mah
I got it part-charged but no way of telling of how charged it was....
It was green so that could mean anything according to manual....
GREEN = 60% ~100%
ORANGE = 20% ~ 40%
(ergh Innokin, wtf happened to 41% to 59% ???)
RED = 0% ~ 20% (or nearly fucked the manual could have said in layman terms)
Well I got about 24 ~ 30 hours out of it and guessing say 60% (often stuff is half or 2/3rds charged)
so might get near 3 days now it's fully charged - based upon the way/amount I vape
Seems about fair for 3000, or 1000 a day at a push
But didn't notice how long it took to charge (soz)
I just left on the plug socket with 2 x 3.1a usb sockets & a decent lead - charges all my stuff quickly
The usb lead seems to be the same one in Kroma - just the i-taste logo isn't there now
(it is a pretty decent lead, not ultra ultra fast like top mofo leads but pretty close imho
some cheapo fleabay leads will take all weekend to charge, the lead supplied is pretty decent)
After all this BS - the mod is very usable - IF your mtl runs in that range 11w to 14w above ohm
or 14w to 17w in sub-ohm settings - the waterproof rubber bung usb underneath maybe on side
is hopefully last crap I'm going to mention or talk about (famous last words)
Other owners - maybe test this mod on your other tanks to let others know
Under £40 here:
https://www.ubervape.co.uk/innokin---adept--zlide-kit-27173-p.asp
If you not got a Zlide then yup grab yourself one I'd say
Sourcemore want $78:99 pre-order - plus shipping FUCK OFF !!!!
https://www.sourcemore.com/innokin-adept-kit-with-zlide-tank.html
£40 is great price - really thought £50 which the rrp might be
mod seems good & versatile on other mtl's
I just end up using almost anything that is charged & not burnt up truth be told
£40 is a great price for the kit - I'm tempted to buy another but I got my Zlide and fancy mod
Think I'll try to resist, though the voices keep telling me I need another couple of these kits.....
Shhhhhhhhhhuuuuusssshhhhhh - begone thy tank kit of temptation