rew
Olympian
- Joined
- May 18, 2016
- Messages
- 35,658
Some new coils out from Jacvapour and they are a range of mesh coils: 0.45, 0.8 & 1.2 ohm options.
https://www.jacvapour.com/coils?coil_brand=292
https://www.jacvapour.com/coils?coil_brand=292
Interesting. I wonder if they will last as well as the regular coils.Some new coils out from Jacvapour and they are a range of mesh coils: 0.45, 0.8 & 1.2 ohm options.
https://www.jacvapour.com/coils?coil_brand=292
Interesting. I wonder if they will last as well as the regular coils.
I’ll get OH to order some
Of all the stock coils I’ve tried the 1ohm regular last the longest and over the year I think we’ve had about 4 that have been a bit iffy. Not the greatest flavour wise but more solid than most. I’ll definitely try these out in the Vims. Will probably go for the 1.2 as C doesn’t like a warm vape.In theory they should last longer. Be interested for an opinion. May order some at some point.
Of all the stock coils I’ve tried the 1ohm regular last the longest and over the year I think we’ve had about 4 that have been a bit iffy. Not the greatest flavour wise but more solid than most. I’ll definitely try these out in the Vims. Will probably go for the 1.2 as C doesn’t like a warm vape.
Ordered some 1.2. Will report back on theseYeah, the 1.2 ohm is for a proper MTL draw apparently. 0.8 ohm is a more loose MTL/ RDL
The original 1 ohm coils were indestructible but I found them quite lacking. The .7 coils were riddled with problems. In my juice they swelled and within 24 to 48 hours they were totally blocked. The .42 coil was pure gold. Be very interested to see how these compare. Would be nice to be able to use a higher resistance but still have the oomph of the lower resistance coils. Would love to try these but a tenner for 3 coils seems a bit much.
Ordered some 1.2. Will report back on these