It should be sort of directly lined up behind the wick. Even just abit off makes a difference. Before you file anything have you got a thicker oring you can swop with the original one. That's what I did before I filed it. It files easy if that is the problem. I did mine in about 1/2 hour with a nail file so with the right equipment it won't take long at all but you need to check that's what it is first. Put your thumb where the wick sticks up and just do it up until the hole lines up with your finger and have a vape and if it doesn't rip your throat out you'll know it's deffo that
I know it's on the s but its the same principle and they both have the same problem. Some folks are lucky and it lines up from the off but I wasn't one of them! When I first got mine the hole was probably at about 5 o'clock instead of 6!
to help coat the wick but as PF says lining up the air hole with the wick is a must and 99% of these Aga-T & DiD clones don't line up when new it keeps your coil cooler and in turn you should get a nice vape from it. (did you not get spare screws & O rings with it)
