Delved in to Boro mods, what do i need?

[MMA_Junkie94]

Aye, the TMD Boro with with PnP SMRT coils or the 0.2 GTX coils is a good shout. I run mine at 45W and airflow fully open and it's great.

Have to agree with the rest too. Best burn your credit/debit card now.

Sorry, i meant where you place the coil in and clamp it down

 

[MMA_Junkie94]

I’m guessing i meant to say “RBA” coils

 

[MMA_Junkie94]

50W, so you like a DTL vape I take it? In which case you're probably going to need something airy. Many are better suited to MTL/RDL but there are a few that can do DTL too.

A lot of people speak highly of the Voltrove 1.1, and the new Reload Ammo seems like it would be really well suited for DTL too. Neither are cheap though.

Cheaper DTL options would be the Damn Vape Atemporal or the Kylin M boro (this is mesh though, and whilst it is great it's limited in capacity).

The new Meson boro from Steam Crave comes with a coil deck and mesh deck. @Mutley1 got it recently as part of the kit and seems to really like it.

All of the above come as part of a bridge/tank combo.

Some more to look into:

The SXK Mobb 2 clone from Ecigone. You will need a boro tank for that though. The largest air pin is 4mm and from my experience I'd say it sits on the line between RDL and DTL.

The Suicide Mods Ether, this has a 4mm pin and comes with a tank you can use any bridge in. A few folk on here have them so hopefully they can chime in.

The Cthulhu 850 which has a 3.8mm air pin and also comes with a tank you can use other bridges in.

That's all I can think of for now but I'm sure other members will have some suggestions for you, and you could always have a look through this thread:

https://www.planetofthevapes.co.uk/...s/what-build-do-you-have-in-your-boro.211531/

As for cotton and coils, again different people will give different answer but I like Cotton Gods cotton and Coilology pre made coils. I usually buy 2.5mm Fused or Tri-Core Claptons. Some bridges can take 3mm coils, but I find it's pushing it a bit on the ones I use.

Cheers mate, gunna have a read through this

 

[mattc1]

Sqonking to a Boro? hmmm

Good Luck

 

[MMA_Junkie94]

Sqonking to a Boro? hmmm

Good Luck

Yeah, they seem so much more convenient for work etc

 

[RAPTOREX]

Lots of money. To answer the title.

 

[JohnNada]

It can be done relatively cheaply with clones and mass produced stuff from the big brands who are slowly getting in on it. Plus you can get good deals on used stuff when the next best thing comes out and everyone sells their previous best things because it's not as new or shiny, despite doing exactly the same thing.

 

[RAPTOREX]

It can be done relatively cheaply with clones and mass produced stuff from the big brands who are slowly getting in on it. Plus you can get good deals on used stuff when the next best thing comes out and everyone sells their previous best things because it's not as new or shiny, despite doing exactly the same thing.

You’re right of course. But only because I would consider £200 lots of money. A BB clone, even Sh, when you add Boro tanks and two or four RBAs with bits, is gonna break that quickly.

 

[Deleted member 54254]

You don't need to spend fortunes if you just approach it in a sensible manner, just decide what you want from it and stick to that, it's very easy to get carried away blinging it up and the endless rba's will drain the cash. It's not going to elevate your vaping experience to some other level but in terms of convenience, they're pretty good.

There are other AIO options out there that supply a very similar experience at a faction of the outlay.

 

[stuartd]

Don't fall for this is the best rba you can buy it doesnt exist. you can buy a £200 rba and a cheap style one and find its probably better than the dearer one