What's new

Dovpo X Signature Tips X Mike Vapes Clutch/ULTON Dram II

Doris_2Fdeal

Achiever
Joined
Oct 8, 2017
Messages
1,686
Authentic Dovpo X Signature Tips X Mike Vapes Clutch 1700 Mech Mechanical Vape Box Mod 21700

6d4dd2b748.jpg.240x240.jpg
9c4c9bde38.jpg.240x240.jpg
cb1f053c94.jpg.240x240.jpg
1540535540.jpg.240x240.jpg

Features
Hybrid 510 connection
Solid silver contacts
Unique locking system for safety
Fine Shot Blasted & Anodized
Machined from Solid Billet Aluminum
Commercial Grade 3D Printed Internal Sled
Internal Kill Switch
Magnetic Doors (16 magnets in total)
Powered by 1 x 21700 battery (not included)


ULTON Dram II Style 22mm RTA
d03242067b.jpg.240x240.jpg
0d35fb70d1.jpg.240x240.jpg
cf8b5e0720.jpg.240x240.jpg
bfc0d4234e.jpg.240x240.jpg


Features
510 threading;
Single coil build deck;
Top filling;
MTL option by different airflow nut (Reducer from 0.8mm to 2mm)
Liquid control by rotating the bell;
Airflow improved


VOZOL Ark 30W 1000mAh VW Mod Pod System Vape Starter Kit 3ml/0.6ohm/1.4ohm
87d00f6fe8.jpg.240x240.jpg
63aa7571ce.jpg.240x240.jpg
dc28282cad.jpg.240x240.jpg
ae30072d7d.jpg.240x240.jpg

Features
Pod Capacity: 3ml
Battery Type: 1000mAh Built-in Battery
Output Wattage: 5~30W
Coil Resistance: 0.6ohm (DL Mesh) / 1.4ohm (MTL Dual)
PVD Acrylic Panels of New Aesthetic Pattern
Independent Coil Design for Simply Replacement
Two Vaping Choices for DL Vaping & MTL Vaping
Biggest Side Fire Button for Smooth Click
0.69" Screen Design to Show All Specifications
Top Filling Cap Design for Easy Filling
Overtime Vaping Protection
Over Temperature Protection
Low / High Resistance Protection
Short Circuit Protection
Low Voltage Protection
Intelligent Hibernation Protection



Ultroner Gather 22mm RDA/RDTA Rebuildable Dripping Tank Atomizer w/BF Pin 2ml
333a222170.jpg.240x240.jpg
bb5f8177a1.jpg.240x240.jpg
40cae1eeb7.jpg.240x240.jpg
ed45ec994e.jpg.240x240.jpg


The RDA/RDTA comes disassembled with each part having it's own compartment and spares etc placed in a plastic tubular container.
Up top we have an Ultem 510 drip tip which fits to the flat top surface of the sleeve/top-cap. The Sleeve/top-cap is one piece for performance purposes but the Stabwood section is held in place by 2 notches and an o-ring so can be removed for cleaning purposes, made of Stainless steel with the mentioned gorgeous stabwood section towards the top gives the Gather quite a unique look. The sleeve has an airflow slot one side and some sort of writing (in signature form) the other in Silver. The colours of the stabwood section will be unique to each atty.

The deck comes pre-installed with a standard pin and to use the Gather as a standard RDA simply screw the base onto the 510 threading and the sleeve/top-cap get's used in the usual manner. To use as an RDA with BF pin simply unscrew the standard pin using the larger supplied hexagonal wrench and screw the BF pin in it's place.

If you want to use the Gather as a standard RDTA before screwing the base disc in place you need to screw the extension pipe onto the 510 threading which gives you some length of pipe and then new 510 threading. Now place the Ultem tube in place and screw the base disc over the threading, o-rings both secures and seals the Ultem tube section.

Features
Materials: Stainless Steel/Ultem/Stabwood
Single Coil
RDA/RDTA Modes
Standard or BF Modes (both RDA/RDTA)
Filling Valve Top-Fill on deck/BF pin
One Sided Airflow
Airflow: Bottom/Lower Side by use of Inserts
Thread: 510

High End Build Quality
Gorgeous Stabwood section (unique to each atty)
Aesthetically pleasing (subjective)
Matching Ultem tube and drip tip
Both a high standard RDA and RDTA
Included standard and BF pins + extensions
RDA and RDTA can both be used with standard or BF pins
Worked great with BF pin as both RDA and RDTA
Can be converted from RDA to RDTA with ease
Very easy build
Fantastic quality Grub Screws
Great performing fill valve (quick and mess free)
3 Ultem Inserts giving very different draws
Inserts can be swapped on the fly
Locking sleeve/top-cap
Smooth airflow
 
Back
Top Bottom