Fogger trouble

[chris991]

First time I wicked it was flooding like mad,used a single wick this time and just getting a popping noise and no vapour,using silca wick,can any help I'm new to all this DIY stuff and don't wanna give up

 

[possiblevaper]

Shouldn't have started on a fogger if your new to it, their a nightmare, I gave up on them and I'm quite experienced in rebuildables. Just keep trying different things until you get something that kinda works


Sent from my iPhone using Planet of the Vapes

 

[Ninjaassasin1983]

First time I wicked it was flooding like mad,used a single wick this time and just getting a popping noise and no vapour,using silca wick,can any help I'm new to all this DIY stuff and don't wanna give up

to be honest mate the fogger gives even the most seasoned of builders a hard time but there is hope double the silica and cut the top bit just outside the chimney and the bottom bit wrap under the coil inside the chimney but make sure ur air intake is clear as I suspect this is why you're getting no vapour

 

[chris991]

to be honest mate the fogger gives even the most seasoned of builders a hard time but there is hope double the silica and cut the top bit just outside the chimney and the bottom bit wrap under the coil inside the chimney but make sure ur air intake is clear as I suspect this is why you're getting no vapour

Built my own coil woooohooooo ,then realised the air intake was stuck on closed,but freed it and it worked but only could fit one strand of silica through kept splitting and couldnt double up through hole,had to wrap coil round Alan key stuck in grooves then thread through screws and tighten and thread one stand of silica through,do u think I would be better with cotton wool? As not getting as good a vape as through my kanger? But it kinda works,do u think it will be a lot easier on the russian clone I have coming tomoz? Thanks for your help

 

[Ninjaassasin1983]

Built my own coil woooohooooo ,then realised the air intake was stuck on closed,but freed it and it worked but only could fit one strand of silica through kept splitting and couldnt double up through hole,had to wrap coil round Alan key stuck in grooves then thread through screws and tighten and thread one stand of silica through,do u think I would be better with cotton wool? As not getting as good a vape as through my kanger? But it kinda works,do u think it will be a lot easier on the russian clone I have coming tomoz? Thanks for your help

yes the russian is much easier just dont use too much wick as it will block the juice channels

 

[chris991]

yes the russian is much easier just dont use too much wick as it will block the juice channels

Thanks il give that a go tomoz,really harsh and taste burnt through the fogger

 

[Ninjaassasin1983]

Thanks il give that a go tomoz,really harsh and taste burnt through the fogger 

honestly mate id get shot of it and get yourself a taifun from vapegeek

 

[chris991]

[Q UOTE=Ninjaassasin1983;358519]honestly mate id get shot of it and get yourself a taifun from vapegeek[/QUOTE]
I've already ordered the russian 91% clone ,only paid 12 quid for the fogger but 25 for the russian,heard good reviews how do they differ from the taifun mate?