Hcigar Kraken clone tank cover fit

[Mawsley]

FT do spares, if that's any consolation

 

[Gaz1983]

FT do spares, if that's any consolation

Just brought one from uk supplier mawsley thank you all the same tho mate . Bk to the drippers for now .

 

[Trungo]

Not had any problems at all with my brass kraken that I got from vapegeek
Maybe a dodgy batch slipped through QC

Sent from my GT-N7000 using Planet of the Vapes mobile app

 

[Astro_Vape]

The plastic tank supplied with my brass Kraken was also too large #JustSaying

 

[Vaping Bad]

I have the FT one the top o ring was too tight while the tank ones weren't causing the tank to come up sometimes when taking the top cap off. So I put a looser one on the top, put another loose one on the bottom and the top cap is a really nice secure fit. I also put one layer of PTFE tape under the tank o rings and that nice and tight now, I generally steam clean that so rarely remove it.

 

[Mawsley]

Solved the 'too large tank' problem.

Cut a strip of PTFE in half, down the middle. Wrap around the groove there the o-rings sit so that they now sit proud. Bit of effort to get the tank back on, perfect seal and no leaks.

Bang. Job's a good'un.

 

[Astro_Vape]

I just swap the SS/Brass tank covers about on the device that is liquid tight. The SS Kraken air flow control cap also needed fudging to work satisfactorily. I've named the working Kraken Frank(enstein).