Help ohms

[louhic_89]

Hi so I have bought the dead drop and just wondered what coils is best to use as I currently vape at 35w and not sure on the ohm coil I will need to use as this is a dual rda I have received a .13 but thinking that could be too high any help will be so helpful thank you

 

[Puffed Daddy]

.

 

[louhic_89]

Do you mean Hell vape drop dead?
What ohms reading do you want to vape at?
Mech or reg mod?
If reg, what's wattage do you vape at?
0.13 is quite low, not high?

Cheers.

I want to vape between 35w - 40w and yes it’s the hellvape one I will be using my oxva velocity and geek vape legend 1

 

[Leni]

Welcome to the forum

How many coils do you have for it, and what ohms are they (each)?

 

[scottish-jim]

Hello louhic_89 and welcome to POTV

35W may be a bit low for a dual coil build but it will be helpful if you can answer the question above from Leni

 

[louhic_89]

Welcome to the forum

How many coils do you have for it, and what ohms are they (each)?

I have 2 coils and they are 0.13 each

 

[LordOdin]

You will be able to Vape at 40w but you will find it a cool vape rather than a warm one.

 

[louhic_89]

You will be able to Vape at 40w but you will find it a cool vape rather than a warm one.

Thank you so much

 

[Leni]

I have 2 coils and they are 0.13 each

Ok, so I haven’t used that RDA, so I may not be the best person to advise. However, with a dual coil build, your resistance will end up being half that of a single coil - so you’ll end up with a resistance somewhere around 0.06 ohms. That is very low, and would need a fair bit of power, I’d have thought. Personally, I would buy (or make) a couple of coils that are around 0.4 ohms, so when you put them both in, your resistance will be around 0.2 ohms.

 

[louhic_89]

Ok, so I haven’t used that RDA, so I may not be the best person to advise. However, with a dual coil build, your resistance will end up being half that of a single coil - so you’ll end up with a resistance somewhere around 0.06 ohms. That is very low, and would need a fair bit of power, I’d have thought. Personally, I would buy (or make) a couple of coils that are around 0.4 ohms, so when you put them both in, your resistance will be around 0.2 ohms.

Thank you so much and if I get the 2 coils at 0.4 would I be able to vape that at between the 35w to 40w