Just got an evod, need a fuller vape

[oska]

I dug out my old ego battery last night and walked the eVod on to try. I now make my own coils which are around 1.8. Vaped much better than I remember so must have had higher ohm heads before.

As said a Vamo is a good start but if you don't want to go down the mod route just yet and fancy something smaller then an ego twist or vision spinner will do the job. Smok do a version which work out pretty cheap. Not tried but might be worth a shot. http://www.bargainvapour.com/index.aspx?pageid=1274299&prodid=9899767

 

[sabre]

My fave vape is a Vivi Nova 1.8- leaky, threads knackered but reliable, warm, and absolutely full of flavour- it has place of honour on my desk at home.
However I take to work my itaste vv with an iclear16.I've just about given up on the Evod now.

 

[anthonyb]

My fave vape is a Vivi Nova 1.8- leaky, threads knackered but reliable, warm, and absolutely full of flavour- it has place of honour on my desk at home.
However I take to work my itaste vv with an iclear16.I've just about given up on the Evod now.

sabre, one turn of PTFE plumbers thread seal tape will sort it. Couple of quid for 12m, from most diy shops.

 

[u8myufo]

A cheap fix imho miles would be purchase an iClear 30 with some 2.1ohm heads.

 

[simonsays]

I know they're not very convenient but for flavour and vapour production is very hard to beat a dripping atomiser.

There's certainly a learning curve in coiling them and you do need a way of checking resistance but even my little 10 quid mini octopus dripper blows evods/protanks/vivi novas right out of the water. Cheap to run too. 20m of kanthal wire I picked up on eBay for 2 quid should last me for a couple of years and cotton wool from asda.

 

[miles]

I received my 1.8 evod head today and it works like a charm, loadsa vapour!

Thanks everyone for your help, this is one of the most helpful and friendly forums I've ever been on so cheers