Just a quick “ how too “ for the above, if it’s not been done before.
Get a small/tiny screwdriver and dig deep down the rubber sides of the button panel.Lever it so much you think you’re going to break it. It will give up. The offending break on the fire switch is tiny and a challenge to glue back together, I’ve superglued mine. If it fails again I’ll turn to araldite. Don’t bother taking the whole thing to pieces. There is a how to on you tube , in Russian or some such which is nonsense . The American one suggests how difficult it is to remove the fire panel but goes no further. Needless to say, it takes a fair bit of force but there’s nothing underneath to damage, as long as you’re not a bull. It’ll need re sealing if you need it to be water tight.
Get a small/tiny screwdriver and dig deep down the rubber sides of the button panel.Lever it so much you think you’re going to break it. It will give up. The offending break on the fire switch is tiny and a challenge to glue back together, I’ve superglued mine. If it fails again I’ll turn to araldite. Don’t bother taking the whole thing to pieces. There is a how to on you tube , in Russian or some such which is nonsense . The American one suggests how difficult it is to remove the fire panel but goes no further. Needless to say, it takes a fair bit of force but there’s nothing underneath to damage, as long as you’re not a bull. It’ll need re sealing if you need it to be water tight.
