Problems with NI200

[ZeroInfinity94]

Right then after a short break from this temp control in droppers am giving it another go.
Same bloody problems though am getting a really harsh throat hit with a juice that I know has next to no throat hit.
It feels as if am getting a dry hit in temp control.
Am using an IPV4 and a tugboat V1, spaced 30guage annealed NI200 12 wraps on a 3mm screwdriver and am at 250c at 27.5j.

Am I doing something wrong?
Am I slightly off somewhere?
Any and all help will be greatly appreciated guys.
Cheers!

 

[Mawsley]

I know someone positive will be along in a minute - but I had so many dry hits from TC builds it was stupid. Hope you get it sorted before your patience wears as thin as mine did.

 

[ZeroInfinity94]

It's made because sometimes it's spot on i get really good flavour a nice amount of throat hit... Which means a ting bit and some really decent clouds but then it's naff constantly.t dry hits, no flavour and when it's not dry hits it's hellish throat hit

 

[Mawsley]

It's made because sometimes it's spot on i get really good flavour a nice amount of throat hit... Which means a ting bit and some really decent clouds but then it's naff constantly.t dry hits, no flavour and when it's not dry hits it's hellish throat hit

Yep. That's why I gave up, same thing happened to me and I figured I didn't want to be bothered trying to learn when kanthal works fine for me.

 

[ZeroInfinity94]

Only wanna get th is down because I work in a shop

 

[ninjavape]

Always nice to see a thread like this after committing myself to possibly the same affliction.

Apparently you want a spaced coil and to have both the mod and coil at room temperature when putting the battery in, could also be related to airflow with a different size of coil.

 

[dw1986]

What is the resistance of the coil at? Temp wise 250c seems a little too high- the burning point of cotton is 210 or 215c if I remember correctly. I never go above 215c on my SX Mini, but temp control is pretty new to me too

 

[ZeroInfinity94]

That's the kicker aint it, there ain't a hope in hell that you can get an rda with the right sized airflow holes in for an NI200 coil seeing as they need to be spaced.

 

[ZeroInfinity94]

dw1986
Resistance is 0.16 at rest, I normally have my subtank around the 250-260c mark with the ni200 OCC heads in and never have a problem even at 30-40j

 

[dw1986]

dw1986
Resistance is 0.16 at rest, I normally have my subtank around the 250-260c mark with the ni200 OCC heads in and never have a problem even at 30-40j

It's pretty new to me too, have you checked for hotspots? Maybe try it at 210c and see if it makes a difference. Tubbyengineer is the expert here!