re use i stick board.

[bear72]

Thanks again

Thanks for the info i will solder the negative wire from the board to the negative 510 then the negative wire from the battery to the tin or 510 not sure which to go with probably battery to 510. does that sound good?

Battery to 510
Your getting there [emoji1303]

 

[nicotinelad]

negative from board to 510 battery to 510 also,

Battery to 510
Your getting there [emoji1303]

is that correct please.

 

[Giurra]

Maybe to search YouTube for disassembly video and check the wiring?

 

[bear72]

negative from board to 510 battery to 510 also,


is that correct please.

 

[nicotinelad]

View attachment 304845

Thanks for taken the time to do the drawing that's a great help. the 510 i have has a tab to solder the negative on , would it be ok to solder the battery negative and the board negative together on the tab so as i dont have to solder twice? now i just have to figure how to solder to the 510 positive pin without melting the gromit ,if i take it off first it looks like i won't be able to able to get it back on over the solder , i guess i will push the pin down from the top and solder fast. what do you think? Thanks.

 

[bear72]

Thanks for taken the time to do the drawing that's a great help. the 510 i have has a tab to solder the negative on , would it be ok to solder the battery negative and the board negative together on the tab so as i dont have to solder twice? now i just have to figure how to solder to the 510 positive pin without melting the gromit ,if i take it off first it looks like i won't be able to able to get it back on over the solder , i guess i will push the pin down from the top and solder fast. what do you think? Thanks.View attachment 304873

Yes solder at the 510 negative for both
Have a watch at this hopefully helps

 

[nicotinelad]

Yes solder at the 510 negative for both
Have a watch at this hopefully helps

brilliant thanks mate.

 

[vapesmarter]

that area ringed in white is the most dangerous it needs no way shape or form to even think about touching the tin

 

[vapesmarter]

Thanks for taken the time to do the drawing that's a great help. the 510 i have has a tab to solder the negative on , would it be ok to solder the battery negative and the board negative together on the tab so as i dont have to solder twice? now i just have to figure how to solder to the 510 positive pin without melting the gromit ,if i take it off first it looks like i won't be able to able to get it back on over the solder , i guess i will push the pin down from the top and solder fast. what do you think? Thanks.View attachment 304873

solder to a proper copper ring the crimp ones are too thin and snap easy I would get a proper 510 from stealth vape etc

to solder the 510 take the 510 apart slip the nut negative connection cup and the spring over the wire then solder into the pin and reassemble

 

[nicotinelad]

solder to a proper copper ring the crimp ones are too thin and snap easy I would get a proper 510 from stealth vape etc

to solder the 510 take the 510 apart slip the nut negative connection cup and the spring over the wire then solder into the pin and reassemble

Thanks for the info, i will be lining the tin so the wire won't touch i also have a couple more 510 s so i will see if i can find a better one . Thanks again for your help i might also replace the wires from the battery sled as i'm not sure if they are thick enough ?