Recycled the hulk mod!

[gerry]

So I had a spare Hammond 1590b I was using to learn the best drilling for magnets, volt meter ect.

So I stripped the hulk mod out of the plastic box I managed to fuck up!

Sanded the Hammond flat (ish) and semi polished it. Used a step drill for switch and 510 and used a Dremel and file for the volt meter (slightly sloppy still)

Made a little cover for the inside that is kinda just push fitted at the moment.

The door was a little messy from the epoxy. Suicide bunny sticker sorted that right out lol!

Hits well with the right build. Comes in at about 3.8-3.9 volts with sag.




Sent from my iPhone using Planet of the Vapes

 

[jont300]

looks good the brushed aluminum look suits it with the black and white stickers. solid looking mod

 

[gerry]

looks good the brushed aluminum look suits it with the black and white stickers. solid looking mod

It's ok at best lol the finish is in no way even near perfect, it was just my first attempt at drilling and cutting out the hole for the voltmeter.

Have these to do next!




Sent from my iPhone using Planet of the Vapes

 

[jont300]

from pics theirs nowt wrong with it brushed finnish wont show scratches good every day mod. like the wood one is it the one modmaker sell

 

[gerry]

from pics theirs nowt wrong with it brushed finnish wont show scratches good every day mod. like the wood one is it the one modmaker sell

No that's the helm by eketar (or something like that) it's a parallel 18650 mosfet. Pretty good for the price


Sent from my iPhone using Planet of the Vapes

 

[jont300]

not heard of one of them before nice looking bit of kit tend to use regulated vv/vw stuff my self though whats the plan for the other two

 

[gerry]

not heard of one of them before nice looking bit of kit tend to use regulated vv/vw stuff my self though whats the plan for the other two

Looking at putting another 26650 series or parallel in the 1590b

I have all the bits and bobs to put together a 10a raptor build in the g box, just need to pluck up enough courage to solder the tiny cap onto the chip! And by tiny I mean fucking tiny!


Sent from my iPhone using Planet of the Vapes

 

[antz1970]

is it an smd cap m8?

 

[gerry]

is it an smd cap m8?

It's a 22uf 16v cap :s


Sent from my iPhone using Planet of the Vapes

 

[antz1970]

with legs? or is it surface mount? if it has legs its shouldnt be too difficult m8