vapesmarter
Mod Maker
- Joined
- Jun 12, 2016
- Messages
- 6,973
this mod started out quite simple then went downhill there were times that I just walked away from it
Technically it's a simple thing, in reality, its a real pain to do
so
the tube
hang on DVD
but of course
tonight "Shutter Island"
Dr. Cawley: I've built something valuable here and valuable things have a way of being misunderstood in their own time. Everyone wants a quick fix. I'm trying to do something that people, yourself included, don't understand, and I'm not going to give up without a fight.
a very apt quote
I have no early shots of how I made this mod because A. I'm not stupid I am aware some competitors are starting to copy each other's styles and B. see point A....
so with that in mind here is a picture of Alfie
ok so you have the mod and you need a hole 29mm wide, this hole you drill in one go (a certain length long) remember it is 29mm wide that the width of Two average fingers you have 2mm play on each side of the hole that's the wall of the mod....so go on, off you pop get drilling
wow stu is that the inside of "The Tube"
no its the inside of my electric motor on the miller that went bang and I mean really bang sparks smoke the lot.....
WTF...... yep hence the name "The Tube"
first of many many mockups
so switchfet installed that promptly died, trouble is a 26650 battery can pulse at 60 amps so a MOSFET was installed to take the power, rebuilt again and again tested rebuilt again till I was happy so in the end...
"The Tube"
colors are silver pearl, white pearl, black mira, blue candy metallic, deep red pearl metallic, a touch of purple and the wood is spalted gelding rose
where do you get the colors from stu?
not telling.... but I don't buy them from the USA, a lot is made for me, I want my mods to be uniquely different.
the 510 is not one I would normally use it is 0.25 of an mm off center and has a cut out I did for venting why I did this I have not got a clue I may replace this but on the whole I am in a negative on the cost of the mod, as a learning curve ive learnt lots from this mod and have lots of ideas for in the future.
plus as you can see no Alfie paw print I just couldn't fit it in!!!!
in regards to bespoke, i know of no other all stabwood hybrid 26650 tube mod out there..??
"the tube" will go out bagged in leather, it's not for the faint-hearted it is very powerful
@mattyk2010 your mod is done
next time
"Capo"
if you love my mods bags or cabinets, cases then like them follow me and...... buy one.
Technically it's a simple thing, in reality, its a real pain to do
so
the tube
hang on DVD
but of course
tonight "Shutter Island"
Dr. Cawley: I've built something valuable here and valuable things have a way of being misunderstood in their own time. Everyone wants a quick fix. I'm trying to do something that people, yourself included, don't understand, and I'm not going to give up without a fight.
a very apt quote
I have no early shots of how I made this mod because A. I'm not stupid I am aware some competitors are starting to copy each other's styles and B. see point A....
so with that in mind here is a picture of Alfie
ok so you have the mod and you need a hole 29mm wide, this hole you drill in one go (a certain length long) remember it is 29mm wide that the width of Two average fingers you have 2mm play on each side of the hole that's the wall of the mod....so go on, off you pop get drilling
wow stu is that the inside of "The Tube"
no its the inside of my electric motor on the miller that went bang and I mean really bang sparks smoke the lot.....
WTF...... yep hence the name "The Tube"
first of many many mockups
so switchfet installed that promptly died, trouble is a 26650 battery can pulse at 60 amps so a MOSFET was installed to take the power, rebuilt again and again tested rebuilt again till I was happy so in the end...
"The Tube"
colors are silver pearl, white pearl, black mira, blue candy metallic, deep red pearl metallic, a touch of purple and the wood is spalted gelding rose
where do you get the colors from stu?
not telling.... but I don't buy them from the USA, a lot is made for me, I want my mods to be uniquely different.
the 510 is not one I would normally use it is 0.25 of an mm off center and has a cut out I did for venting why I did this I have not got a clue I may replace this but on the whole I am in a negative on the cost of the mod, as a learning curve ive learnt lots from this mod and have lots of ideas for in the future.
plus as you can see no Alfie paw print I just couldn't fit it in!!!!
in regards to bespoke, i know of no other all stabwood hybrid 26650 tube mod out there..??
"the tube" will go out bagged in leather, it's not for the faint-hearted it is very powerful
@mattyk2010 your mod is done
next time
"Capo"
if you love my mods bags or cabinets, cases then like them follow me and...... buy one.