What Did You Do Next?

[FatherJackHackett]

The Exceed D19 is not technically an AIO - it has a tank that unscrews from the battery. Two separate parts. Don’t worry about all the acronyms, you don’t need to know any of that to get vaping, you just want something with stock coils, I.e, that doesn’t involve mini screwdrivers and cotton pads. Go for either either the Coolfire mini (mod) with the Zlide (tank) or the Kroma-A (mod) and Zenith (tank) kits. Both use the same coils.

Mod - battery part/power supply

I think you're pretty much on the money here, too busy concerning myself with stuff far too advanced for the stage I am at, and trying to take in too much information too quickly. Yes, I need to concentrate on something with stock coils, in that all I need to do is use a Vape that just needs the stock coil replaced every now and then, as well as cleaned out occasionally. I looked up the Innokin Plexstar/Plex on YouTube, lovely piece of kit, but looks like it's a DTL as opposed to a MTL, so next video I am going to look up is the Zenith & Coolfire Mini, like you & @Fuctifino have suggested.

 

[Frogprince]

I only recently got my 1st mod and tank (6 days ago) after using a simple ego style pen for 4 months.
the 1st tank i liked the look n sound of was the aspire nautilus 2s, but a couple of reviews said it was prone to flooding with thinner liquids wich I use.
after that I saw many on here raving how good the zenith is for MTL and I dont recall seeing any bad reviews of it so made my mind up the zenith or zlide (both by Innokin, both take the same zenith coils) was what I wanted.

then to power it id decided already that a single external battery mod with 2 batteries would be better in the long run, I wanted to buy 1 kit that will last me and not be changing kits every few months. tho more money than id originally planned to spend, I figured it would be more future proof if in a few month i changed vaping style etc. plus with 2 batteries one could be charged in seperate charger while one was in use.

so to get the kit I wanted I had to buy the tank, mod, batteries and charger seperately.

I ended up with the Innokin Zlide tank with 1.6ohm coil, the Vaporesso Armour pro mod with 2x 21700 batteries and a small charger.


I cant compare the Zlide to any tanks as apart from the ego style pen its the only one ive used, but I can say its very easy to fill and change coils, I have the airflow on 1 hole for a tighter draw like smoking. so like others in this thread id recomend checking out reviews for the zenith and zlide tanks,

 

[FatherJackHackett]

The Atomisers I am currently using from Joytech are

8-14W
1.2ohm MTL

https://www.joyetech.co.uk/joyetech-ex-atomizer-heads-x-5.html This is the link.

With the Coolfire Mini & Zenith Tank, I would select the 1.6ohm Coils to keep it as similar to the Exceed as possible? I see the Zenith ones are £2 cheaper for the same amount, although the Coolfire Mini itself is roughly £20 more expensive, but a worthy buy by the sounds of the things, so definitely going for it. Just unsure what Coils to buy to keep it around the same experience as the Exceed.

 

[Fuctifino]

The Atomisers I am currently using from Joytech are

8-14W
1.2ohm MTL

https://www.joyetech.co.uk/joyetech-ex-atomizer-heads-x-5.html This is the link.

With the Coolfire Mini & Zenith Tank, I would select the 1.6ohm Coils to keep it as similar to the Exceed as possible? I see the Zenith ones are £2 cheaper for the same amount, although the Coolfire Mini itself is roughly £20 more expensive, but a worthy buy by the sounds of the things, so definitely going for it. Just unsure what Coils to buy to keep it around the same experience as the Exceed.

1.6 Ohm Z coils are OK, ran them @ about 10.5w
but I personally would say the 0.8 Ohm coil just edges it at 13.5w~14w flavour wise

1 hole open on air flow as @Frogprince runs on his Zlide
there isn't much difference between 1.6 & 0.8 but the 0.8 imho just edges it for me but could be my taste/e-juice

tbh you don't have to go nuts on a mod - I only got one 18650 mod, rest are all internal battery mods (battery built in)
you don't necessarily need an ultra high 100w+ mod or mega capacity mod as such.....
a humble 50w or modest 75w, say 1300~2000mah mod is plenty to see you through 24~36hrs
(though more is better, though not a must have)
Basically any variable mod (battery thingy) will do ya - you aren't pumping out the voltage "juice" on either Z coil
(you don't draw the National Grid on MTL, well not usually, the wattage is often around 9 to 18w for MTL stuff)

I actually prefer the Kroma over the cool fire mini kit but any mod will do as I've said
a Zenith in 24mm diamter, 2ml/4ml, 22mm diameter 2/3ml or the Zlide - all same meat different gravy using brilliant Z coils
should get 2 weeks or more from each coil blah blah blah......

As I like the bigger Kroma this kit @ £40 is a pretty good deal if you can run to it.....
https://www.ebay.co.uk/itm/Authenti...hash=item3fad92cd3e:m:mkxZ4YAQOCM6EZKBjfiHbiQ
normally that kit is just under/over £50 & cool fire mini kit is just under £40

you get a decent Zenith 24mm with 2ml easy fill tank (should get both 1.6 & 0.8 coils)
75w 2000mah Kroma mod, yeah you won't go wrong with that imho out of the box

I found the cool fire mini though lovely & dinky, only takes 22mm tanks (no good on Hastur or other 24mm tanks)
plus a bit thin for my jumbo hands - no offence, cool fire mini is dinky for ladies/handbag but I like a slightly more chunky mod
(but not a fucking enormous brick mod like a Motorola 8000 80's mobile phone)

But like I said almost any mod will do ya