What did your Postie bring you today? - VAPE MAIL!

[john john whaur ye gon]

Picked up a Topside Dual SE, Hellvape Passage and 4 bottles from @m1stergeorge, happened to be the exact setup I was looking to buy so couldn't believe my luck when I saw it in the classifieds section

First time I've tried squonking and I've not used an RDA in about 3 years so a slight learning curve but the Passage looks forgiving. The hunt for my missing box of tools etc isn't proving too fruitful at the moment though

View attachment 211274

I use digiflavour mesh pro on my topsides on ss mesh temp control,elements fresh squeeze. bannana nut bread, or IVG cola bottles they bounce in flavour even at low temp, only downside the mesh pro takes enough cotton to fill a 15 tog duvet, got fresh squeeze on the go in between a bit of custard just now

 

[oORobOo]

I use digiflavour mesh pro on my topsides on ss mesh temp control,elements fresh squeeze. bannana nut bread, or IVG cola bottles they bounce in flavour even at low temp, only downside the mesh pro takes enough cotton to fill a 15 tog duvet, got fresh squeeze on the go in between a bit of custard just now

Good shout I just done my first build on it using some SS triple core fused claptons in TC mode, done a bit of a crap wicking job and am getting a fair bit of spitback so think I thinned it out a bit too much. Still a nice vape though, got some of prime vapes clotted custard on the go.
Think I'll probably end up going for a beefy single coil on it over mesh so maybe a drop solo or just an original drop, have been looking for a Wotofo Recurve or a Asmodus Blank but struggling to find one that's not gold or rainbow which isn't a total rip-off

 

[eyeball kid]

Good shout I just done my first build on it using some SS triple core fused claptons in TC mode, done a bit of a crap wicking job and am getting a fair bit of spitback so think I thinned it out a bit too much. Still a nice vape though, got some of prime vapes clotted custard on the go.
Think I'll probably end up going for a beefy single coil on it over mesh so maybe a drop solo or just an original drop, have been looking for a Wotofo Recurve or a Asmodus Blank but struggling to find one that's not gold or rainbow which isn't a total rip-off

Red juice have all the colours (recurve)plus stainless for £23.99 ( not a bad price for a quality rda) the 24mm dual coil recurve is cheaper. You can get decent clones from ft for under a tenner but obviously delivery may take a few weeks til they catch up.
The drop solo was very good too as I remember.

 

[oORobOo]

Red juice have all the colours (recurve)plus stainless for £23.99 ( not a bad price for a quality rda) the 24mm dual coil recurve is cheaper. You can get decent clones from ft for under a tenner but obviously delivery may take a few weeks til they catch up.
The drop solo was very good too as I remember.

I'm so sick of seeing this message! Haha, but thank you mate, they do have the stainless in stock so that would look o.k and better than what I have found so far Gonna have a look at the clones, kinda thinking/hoping there's a version 2 in the pipeline, bit nuts to discontinue an RDA that must still be selling well.

 

[john john whaur ye gon]

Good shout I just done my first build on it using some SS triple core fused claptons in TC mode, done a bit of a crap wicking job and am getting a fair bit of spitback so think I thinned it out a bit too much. Still a nice vape though, got some of prime vapes clotted custard on the go.
Think I'll probably end up going for a beefy single coil on it over mesh so maybe a drop solo or just an original drop, have been looking for a Wotofo Recurve or a Asmodus Blank but struggling to find one that's not gold or rainbow which isn't a total rip-off

I always get a crackle pop and spit back after squonking recon its just that much cotton and the large flat mesh, just live with disapears after first draw, Drop solo's are brilliant, got a wotofo dual recurve not used much, need to get round to trying a bit of Prime vapes custard in,and temp control. Tried elements crema really brings out the sweet in its okay . On the Orange just now 0.13 ohm, 60 w ss temp set 105 slightly warm mouthwatering orange sweetness lovely, not the fanta/tango burst your head menthol stuff, which i am not keen on

 

[eyeball kid]

Good shout I just done my first build on it using some SS triple core fused claptons in TC mode, done a bit of a crap wicking job and am getting a fair bit of spitback so think I thinned it out a bit too much. Still a nice vape though, got some of prime vapes clotted custard on the go.
Think I'll probably end up going for a beefy single coil on it over mesh so maybe a drop solo or just an original drop, have been looking for a Wotofo Recurve or a Asmodus Blank but struggling to find one that's not gold or rainbow which isn't a total rip-off

Vape and juice have the black still but as it's a high street chain it's priced at it's original retail price £29.99.
https://vapeandjuice.co.uk/products/wotofo-recurve-rda
There's plenty of really good single coil rda 's around while your waiting for a s second hand one to come up.
As squonking is out of favour currently, every shops sale section seems to have a few belters for silly money.
If you see the geekvape Athena around, that was very good and despite the fact it was a tad noisey, the tobhino was a flavour machine.

 

[Mr Ripple]

Recieved in trade from @andyroo and what a great ape.

 

[Woowoo]

Great vape mail day today for me Hermes have just been to me with a Vaporesso Target PM80 Sub - OHM Pod mod.
Sent to me by a very kind ape @AJT his prize he won in Vaporesso giveaway as he would not use it thank you so much for thinking of me you are a top ape Sir .

What do you think of it? I REALLY liked it at first but now suffer constant leaking issues! I bought some 4ml pods also and same problem. Using 70/30 juice but tanks seem to leak from anywhere!

 

[eyeball kid]

What do you think of it? I REALLY liked it at first but now suffer constant leaking issues! I bought some 4ml pods also and same problem. Using 70/30 juice but tanks seem to leak from anywhere!

Weird. Mrs kid has the voopoo vinci 's and the pm80 in constant use been through a couple of coil packs worth on each now and the pm is bone dry (she uses the 0.3ohm coils, 4ml pods) but whatever coil she uses in the vinci it remaims a little seepy.
must be some variations on the production soewhere.
I will dig out some more pods to experiment. Been chuffed that it's stayed so dry.

 

[Woowoo]

Weird. Mrs kid has the voopoo vinci 's and the pm80 in constant use been through a couple of coil packs worth on each now and the pm is bone dry (she uses the 0.3ohm coils, 4ml pods) but whatever coil she uses in the vinci it remaims a little seepy.
must be some variations on the production soewhere.
I will dig out some more pods to experiment. Been chuffed that it's stayed so dry.

The first couple of tank fulls in both did, now started seeping to the point of clean in the morning and after a top up of tank having to clean puddle before popping tank back in. Sometimes it appears as though leaking from filling bung on “swivel” side, so checked that not worked loose, other times appears as though from coil. Still using coils that came with it - have a box of .2ohm coils I bought at same time so will see if any better when changed. Would be just my luck to have 4 leaky pods!!!