After all this time, I just want something that works, any recommendations?

[Richard Winter]

The 'pod' is 2 sections. A 510 base that screws into the mod, and the plastic pod held in to it by strong magnets.
I don't know if the CRC pod would work with your set-up.
I wouldn't class the Marvos S as a pod, but it's a grey area.

The CRC pod I believe is 26mm diameter and the available space on the Marvos S is 26mm so its touch and go if it fits. There is a 4mm glass DTL pod available for the Marvos S.

 

[Richard Winter]

@conanthewarrior I think the Marvos S would piss you off, tbh.
It has the habit of changing the Wattage to what it thinks is best.

You can switch the auto detect off and run it in power mode so you can adjust the power level to what you want.

 

[DMAN]

The CRC pod I believe is 26mm diameter and the available space on the Marvos S is 26mm so its touch and go if it fits. There is a 4mm glass DTL pod available for the Marvos S.

I have the CRC pod on my Marvos S. I was meaning if it would fit the set-up he already has.

 

[DMAN]

You can switch the auto detect off and run it in power mode so you can adjust the power level to what you want.

It sometimes adjusts the Wattage in Power mode too, even with Smart turned off.

 

[Richard Winter]

It sometimes adjusts the Wattage in Power mode too, even with Smart turned off.

Oh. I've not noticed that happen when I was using mine. Not used mine for a while now. Will get it out soon and see if mine does it. Thanks.

 

[DMAN]

Oh. I've not noticed that happen when I was using mine. Not used mine for a while now. Will get it out soon and see if mine does it. Thanks.

I wonder if it is the 0.25 coil at 55w i'm using. Maybe too much for it. I'm using the 0.5 coil in the glass tank at 32w on another mod and it never jumps. I'll swap coils when this one dies.

 

[Richard Winter]

I have the CRC pod on my Marvos S. I was meaning if it would fit the set-up he already has.

Good to know it fits.

 

[Richard Winter]

I wonder if it is the 0.25 coil at 55w i'm using. Maybe too much for it. I'm using the 0.5 coil in the glass tank at 32w on another mod and it never jumps. I'll swap coils when this one dies.

I very rarely go above 30W. I remember trying a few different type coils with no problem. I will get it out and have another play and see what happens.

 

[conanthewarrior]

I have the CRC pod on my Marvos S. I was meaning if it would fit the set-up he already has.

I wasn't very clear in what I wrote, my apologies. I didn't mean to use it on my current setup, I meant where do I get the CRC tank without buying the Marvos X as well as the X just for the tank?

It might piss me off, I am not sure. I just would like something that for example if I select a power that requires 3.7V it provides that voltage without dropping off, for this it would need some type of boost circuit. Most of my single 18650 mods have this so I was surprised the drag X doesn't, and the power hitting the coil drops off with the battery instead of being boosted.

 

[DMAN]

I wasn't very clear in what I wrote, my apologies. I didn't mean to use it on my current setup, I meant where do I get the CRC tank without buying the Marvos X as well as the X just for the tank?

It might piss me off, I am not sure. I just would like something that for example if I select a power that requires 3.7V it provides that voltage without dropping off, for this it would need some type of boost circuit. Most of my single 18650 mods have this so I was surprised the drag X doesn't, and the power hitting the coil drops off with the battery instead of being boosted.

I'll have a search to see where i bought the CRC pod from.
Most pod systems are cheap and cheerful so i don't expect much from them.