Aspire cleito problems

[chubbaduckie]

Hi guys im brand new to this forum and to vaping, i recently purchased the aspire cleito sub ohm tank for my cool fire 4 plus box, i was using the isub apex that came with it and found it to be a nice tank but couldn't get use to not really seeing the liquid in the tank so i got the highly rated new aspire cleito. 1st day was great beautiful flavour great vape production for me im using the .4ohm coil on 45-50w the problem is im getting alot of liquid coming up through the chimney through the wide bore drip tip into my mouth its like im drinking more liquid than vaping but hot dang its hot and burning my tongue, also ive had a little bit of leaking from the airflow so i change the coil to a spare .4ohm coil i also change the pyrex glass just incase it was that and the same thing has happened again boiling juice right in my mouth and down my throat, it also leaked again from the airflow and now i cannot unscrew it from my box mod 8-( i really want to get on with this tank as the topfill is great, the fact i can see how much juice i have is also a pro but the cons are weighing up agaisnt it now

Just to be thorough.
When i prepared the coils i only put juice in the wick holes on the side as ive read not to put any juice down the chimney which makes it spit!

Any help/advice would be amazing.

 

[RichieRich]

What PG.VG ratio are you using?

The first Cleito i had didn't like anything below 60VG and seemed to seep through the coil flooding it and leaking through the airflow. Anything above that, stayed in the tank leak free.

 

[chubbaduckie]

What PG.VG ratio are you using?

The first Cleito i had didn't like anything below 60VG and seemed to seep through the coil flooding it and leaking through the airflow. Anything above that, stayed in the tank leak free.

I am using a 40pg 60 vg liquid at the moment, the leak is as much the problem as the spit back being bloody hot like fire.

 

[RichieRich]

Roll up a small square of kitchen roll, and pop it down the centre of the coil (with the lid still on the tank). Let the excess juice soak into the paper for about 10-15 seconds, then remove.

Vape again and see how it is from there.

If you put a new coil in, don't prime it, just put it in the tank, fill it, and close the lid. Leave it for 15-30 mins before vaping it. I found if you prime the cotton from the top of the chimney or the inlets on the side, it will over-prime it and you will get a lot of spitback.

 

[chubbaduckie]

Thanks Richie i will try that now also thanks for the fast reply. My tank still seems to be glued onto my box i saw a post on here a while ago sayin to stick a flat head in the airflow to help get it off. Any suggestions?

 

[RichieRich]

Never had that issue, but you could try sticking a vape band on it, slide it to the bottom so it covers just above the airflow for grip, and it should aid unscrewing it

 

[OccultScientist]

Worth checking the atomizer is screwed right down onto the base properly. Also with my first coil I got a bit over excited and fired it too soon, it does take a while to properly "prime".

 

[chubbaduckie]

Worth checking the atomizer is screwed right down onto the base properly. Also with my first coil I got a bit over excited and fired it too soon, it does take a while to properly "prime".

Any advice on how to get my cleito off my cool fire 4 plus without breaking it, ive just tried vape band and a flathead in the airflow but it wouldn't budge, it only seems to be stuck on after the juice leaked could that be causing it? I dunno how but im at my wicks end (Pun intended) with this now lol

 

[vincey]

Any advice on how to get my cleito off my cool fire 4 plus without breaking it, ive just tried vape band and a flathead in the airflow but it wouldn't budge, it only seems to be stuck on after the juice leaked could that be causing it? I dunno how but im at my wicks end (Pun intended) with this now lol

Just the thing, you'd need to wait for delivery though.

http://www.checkandvape.co.uk/

 

[chubbaduckie]

Th

Just the thing, you'd need to wait for delivery though.

http://www.checkandvape.co.uk/

Thank you very much mate appreciate it very much. Just what i need