Geordie Rob
Achiever
- Joined
- May 2, 2014
- Messages
- 1,913
In my short time vaping I have had a pretty extreme infection of shinny itus which thankfully I still have, I cannot shift it and tbh I dont want to 
, but its time to start moving some shinny stuff on, all pretty new too:
1/ Smok SID VV/VW mod + extra's (Gone Trade agreed)
Variable voltage / Variable wattage, bought from vapedaddy 20/03, had a mech by April 3rd at which point stopped using the SID so this one is box fresh this will include a charger and two pretty much un-used efest 18650's used said mechs in either 350/500 mode up until now:
There is also a cheap but functional 350 tube included that I bought off ebay:
This lot was £65quid plus delivery to me, £35 paypal gift to your door.
Direct rip of spec:
2/ HCigar Hana Modz DNA20 - Bought from Vape Geek weeee hours of one morning totally shitfaced shinny shinny must have burp kind of purchase last Saturday 03/05, I like the MOD performs but I prefer my mechs if i'm honest, during drunken purchase I bumped into all you folks which you can read about - here if you want
Was £84.10 to my door REDUCED to mad man price £55 to yours includes next day tracked shipping paypal gift or going up for trades
(MOD, pouch / zip bag / usb lead)
3/ AtimiZoo Roller Custom (telescopic) (removed till new flush 5-10 arrives) (Custom as you can have a mix of matt/brushed/shinny rather than just one) -
This one is a tough one would keep it and I won't be heart broken if it doesnt sell its a joy to use, but if I want to ensure I dont cure myself of shinny itus heads been turned in the world of stingrays, 22mm nemis etc
Bought from reseller - iFancyone.com 03/04 was £121-98 to my door, £85quid to yours, lots of pictures of this one its a minter.
I want to be 100% on description you get two brass parts in the 510 one flush and one slightly raised for bottom breathers, the flush if I keep it, i would buy a new one it works I get an Ati down solid on it (origen on it below) but think it could be on its way I've had the brass connector come out a couple of times only whilst unsrewing ATI's I just finger screw it back if it does happen (brass connector on the right of pic below) you can get replacements direct for a wallet thumping under five euro, of if you so fancied a Rhodium-plated brass one for 7euro. All parts can be bought individually.
Part here: (its functional now maybe me being fussy)
Roller/Dingo - 510 Connector | atmizoo vaping modware | shop
With that said:
Dinky 350 mode:
350 with Origen (note kanthal wounds, not a great builder yet, got em all over fing knack next day) hehe
500 - still very much a stealthy vape:
650 still feels small tbh, didnt really spend much time using it in 650, only recently started wanting higher amounts of amps etc:
Bottom engraving serial:
Off work next week so postie wont be an issue, let me know if anything takes your fancy, more to come but that's it for now, have a few nautilus's with spares to rebuild stainless tanks etc.
I think I have been very fair on prices its all new gear pretty much I see stuff going up for like a fiver/tenner less than bought which is not the case here.
Paypal gift would be prefrered so I dont take even more of a hit, but if your not comfortable with that we can talk.
Keeps going complete just put it up...........
Cheers
Rob
, but its time to start moving some shinny stuff on, all pretty new too:1/ Smok SID VV/VW mod + extra's (Gone Trade agreed)
Variable voltage / Variable wattage, bought from vapedaddy 20/03, had a mech by April 3rd at which point stopped using the SID so this one is box fresh this will include a charger and two pretty much un-used efest 18650's used said mechs in either 350/500 mode up until now:
There is also a cheap but functional 350 tube included that I bought off ebay:
This lot was £65quid plus delivery to me, £35 paypal gift to your door.
Direct rip of spec:
- Variable wattage - can be adjustable from 3.0W to 15.0W (0.5W increments)
- Variable voltage - can be adjustable from 3.0V to 6.0V (0.1V increments)
- One button with 7 menus
- Maximum current output: 4 A
- Built in OLED display showing menu, function and selection
- Reverse polarity protection
- 510/ eGo threading connector
- Compatible with CE4, CE6, DCT, Vivi Nova, Protank Etc.
- 18650 Battery Model. Uses 1x 18650 Battery
2/ HCigar Hana Modz DNA20 - Bought from Vape Geek weeee hours of one morning totally shitfaced shinny shinny must have burp kind of purchase last Saturday 03/05, I like the MOD performs but I prefer my mechs if i'm honest, during drunken purchase I bumped into all you folks which you can read about - here if you want
Was £84.10 to my door REDUCED to mad man price £55 to yours includes next day tracked shipping paypal gift or going up for trades
(MOD, pouch / zip bag / usb lead)
3/ AtimiZoo Roller Custom (telescopic) (removed till new flush 5-10 arrives) (Custom as you can have a mix of matt/brushed/shinny rather than just one) -
This one is a tough one would keep it and I won't be heart broken if it doesnt sell its a joy to use, but if I want to ensure I dont cure myself of shinny itus heads been turned in the world of stingrays, 22mm nemis etc
Bought from reseller - iFancyone.com 03/04 was £121-98 to my door, £85quid to yours, lots of pictures of this one its a minter.
I want to be 100% on description you get two brass parts in the 510 one flush and one slightly raised for bottom breathers, the flush if I keep it, i would buy a new one it works I get an Ati down solid on it (origen on it below) but think it could be on its way I've had the brass connector come out a couple of times only whilst unsrewing ATI's I just finger screw it back if it does happen (brass connector on the right of pic below) you can get replacements direct for a wallet thumping under five euro, of if you so fancied a Rhodium-plated brass one for 7euro. All parts can be bought individually.
Part here: (its functional now maybe me being fussy)
Roller/Dingo - 510 Connector | atmizoo vaping modware | shop
With that said:
Dinky 350 mode:
350 with Origen (note kanthal wounds, not a great builder yet, got em all over fing knack next day) hehe
500 - still very much a stealthy vape:
650 still feels small tbh, didnt really spend much time using it in 650, only recently started wanting higher amounts of amps etc:
Bottom engraving serial:
Off work next week so postie wont be an issue, let me know if anything takes your fancy, more to come but that's it for now, have a few nautilus's with spares to rebuild stainless tanks etc.
I think I have been very fair on prices its all new gear pretty much I see stuff going up for like a fiver/tenner less than bought which is not the case here.
Paypal gift would be prefrered so I dont take even more of a hit, but if your not comfortable with that we can talk.
Keeps going complete just put it up...........
Cheers
Rob
Last edited:
