Atlantis-repulsive aftertaste!!

[the mutt]

Double post ..... Sorry admin folk

 

[the mutt]

As a point of note, just put some Mrs Lords Druide into it and at 30 watts wasn't nice so now hovering around 24watts to get the enjoyment out of it which is different from the 18 I had it at in my nauti mini in the past, So I think you need to play around and find your sweetspot for your own enjoyment

 

[alwayslit]

I'd soak the coil in vodka personally

Werd!!

How high were you firing the atlantis. Was it wicking properly. Were the ducts fully exposed. What was setting on your airflow. Sounds like you're doing okay for now

 

[adammale73]

I was originally firing between 30-40.......don't know what the ducts are......the airflow was 2nd to widest

 

[alwayslit]

I was originally firing between 30-40.......don't know what the ducts are......the airflow was 2nd to widest

......30w is on the high end of that tank. I tried it a couple of time on the 40-50w range it was just okay. I normally keep it at 23w to 30w depending on the juice ratio. If I could write a sentence correctly I'd be dangerous, LOL. What I meant is were the juice ducts fully open or closed. If you tighten the atty too hard it closes the juice ducts and it wicks poorly.

 

[adammale73]

Yeah, I've dropped right down to below 30 watts.....found some 'mobster' pure VG juice that's working a treat.....ah, didn't know that about the juice ducts...you mean when I'm tightening the coil into place right?

 

[alwayslit]

Yeah, I've dropped right down to below 30 watts.....found some 'mobster' pure VG juice that's working a treat.....ah, didn't know that about the juice ducts...you mean when I'm tightening the coil into place right?

Cool, not the coil itself but the tank to the base. The ducts from the coil need to be exposed and when over tightening the tank the metal base will cut off the ducts.

 

[aspire]

I was originally firing between 30-40.......don't know what the ducts are......the airflow was 2nd to widest

30W-40W????

Atlantis is compatible with 20-30W wattage output batteries,Customers need check the wattage output is enough to fire our Atlantis,what's more,please make sure using wattage not exceed 30W,or you will burn the coils

 

[aspire]

So it's safe to soak everything (coil included) in soapy water? Someone suggested boiling it?!?

No,the coil can not be soaked in water.

How to clean the device?

First:unscrew the device,take out the coil.
Second:wash the device with clean water,we can use q-tip to clean the corner part.
Then let the device dry.

For normal clean,we can use the alcohol/warm water clean the device,but please don't let the device soak in the alcohol/warm water for long time(about 10-20 minutes is ok),then do deep clean with water.