Claptons !!!! Help pls

[westy]

Ok I'm trying to make a 0.4 Clapton coil so they come out around .2 dule but I can get any where near.

What wire combos do ppl use to get this sort of figure and wraps/and what do you wrap around ?

Thanks in advance...is there a post which give combos.

 

[Smut]

24g ni80 core, 3mm id, 5 wraps

fused clapton 26g ni80 core, 2.5mm id, 6 wraps

 

[westy]

24g ni80 core, 3mm id, 5 wraps

fused clapton 26g ni80 core, 2.5mm id, 6 wraps

What gage should I wrap with ?

 

[westy]

An

24g ni80 core, 3mm id, 5 wraps

fused clapton 26g ni80 core, 2.5mm id, 6 wraps

And thank you really struggling to get a ohm I'm happy to vape on a mech which is I want .2 dule

 

[Smut]

What gage should I wrap with ?

Doesnt really matter what the wrap wire is, the ohms it adds to the overall amount makes minimal difference

 

[westy]

Doesnt really matter what the wrap wire is, the ohms it adds to the overall amount makes minimal difference

That's where I've been going wrong... I've been trying to compensate for the wrap wire....thanks for clearing that up

 

[westy]

My fused are comeing out at 0.20 useing 26awg ni80 dule core with a 40awg wrap ? But that's a single coil if I dule it will be to low.

 

[Smut]

Should be no where near that low sure its 26g and not 24g?

 

[westy]

Should be no where near that low sure its 26g and not 24g?

It say 26awg on the spool and its from stealthvape so I'm pritty sure it is.and way of double checking ?