DIY RDA build stand??

[speedfreek67]

About 5 years ago I made myself a build stand, when I worked as a CNC programmer/operator.

I used a piece of 25mm Melamine faced white birch ply and used a stealthvape 510 for atty stands.

I cut it from the reverse side, with a 9mm "thru" hole for the threaded shaft and a counterbored "blind" hole based on the size of socket wrench used to tighten the nut.

The 80mm and 120mm markings are there to remind me how long to cut my wires..

 

[Crewella]

About 5 years ago I made myself a build stand, when I worked as a CNC programmer/operator.

I used a piece of 25mm Melamine faced white birch ply and used a stealthvape 510 for atty stands.

View attachment 279194

I cut it from the reverse side, with a 9mm "thru" hole for the threaded shaft and a counterbored "blind" hole based on the size of socket wrench used to tighten the nut.

View attachment 279195

The 80mm and 120mm markings are there to remind me how long to cut my wires..

Looks lovely, that does.

 

[speedfreek67]

Looks lovely, that does.

Thanks. It's simple, but does the job, and the melamine top surface has stood the tests of time very well.

Stealthvape don't seem to sell those blanked off 510's any more, but I have a spare one I never used if anyone wants one for a project.

 

[Miss Pepper]

@Willo3092 OP hasn't been back since 2016! Don't bump old posts again.