Dual Coil MTL RTA…?

[MHL]

I saw this post a few days ago and never imagined it would make it to 3 pages! XD

Posting to try and make it 4...

 

[Crispycritters]

On the subject of 4 - if you get an old velocity clone you can fit 4 coils between the posts and screw down the airflow to a tiny slit so it can give a nice tight MTL draw. It may be 4 times hotter than your average blast furnace though.

 

[The Seer]

Or get yourself a RTA that does RDL, Don't think you have any chance of getting a dual MTL as already said. Or put a MTL Drip tip on a Sub Ohm Tank.

i reckon that’s probably the better idea conservatives the lack of dual coil MTL s on the market. I wasn’t aware that an MTL chimney will fit a DTL RTA?

 

[The Seer]

It would be easier just to use an MTL staple or Alien coil and use it at a higher wattage with a more open airflow. It will give a looser MTL (some may consider it Restricted DL) but it will definitely provide more vapour - personally I think you're pissing in the wind if you try to run dual coils at a more traditional 12 to 14 Watts with a really tight airflow. Crank up the power and open the airflow - you don't want a traditional MTL vape, so don't try to get something different from the norm by using the same power and airflow settings as the 'true MTL' vapers - it won't work.

im using a Siren tank on maximum airflow, I find if I restrict the airflow the experience isn’t as good as with it fully open.

 

[The Seer]

I wouldn't put them in an MTL tank if I were you. Those coils will be good for DL as they need a lot of power and a lot of airflow, if you put them in a small MTL tank (they probably won't fit anyway) they will just cook the juice or take forever to ramp up.

By cranking the power up and opening the airflow - I meant compared to a regular MTL vape i.e. use 20 to 25 watts instead of 12 to 14, and use a 1.5 to 2.0mm air inlet rather than a more traditional 0.8 to 1.2mm.

Don't put a huge coil in an MTL tank - MTL Staples and MTL Aliens are larger than the vast majority of MTL coils, but they aren't humongous DL coils like juggernauts.

im currently anywhere between 50 and 60 watts with 22 kanthal with 6 turn coil with a diameter of 3mm

 

[Crispycritters]

im currently anywhere between 50 and 60 watts with 22 kanthal with 6 turn coil with a diameter of 3mm

Unusual - but if it works for you that's great. Personally I like a 1.5 to 2.0mm airflow and around 20 Watts for MTL which most MTL vapers would find too loose/too much wattage for MTL but were all different.

Exactly which version of the Siren are you using? I like an MTL tank that can be opened up enough to run at higher wattages and it sounds like something I'd like to buy. I doubt I'll go as far as 50 Watts but it sounds like a good candidate for a higher power MTL vape

 

[Deleted member 54254]

50-60W, you ain't doing MTL bud...

 

[Deleted member 54254]

I suggest you look at RDTL options.

 

[LordOdin]

I can't DTL at 50-60w lol, way to warm for me though i mainly do Mesh in DTL.

EDIT:- I fibbed, i have my Vaporesso Cascade sat at 50w right in front of me.