How the flip do you pronounce Dvarw?
Is it Deevarw? D'varw? Or just straight up Dvarw?
Anyway, mine came today with much excitement after reading this thread & it hasn't let me down
With all the clone choice, I went with this SKU:
https://www.fasttech.com/products/0...w-mtl-v2-styled-rta-rebuildable-tank-atomizer
First thing I did was to swap out the drip tip & put the mid sized tank in place
Checked the draw & found it too tight with the default insert in place so moved up them until I found one that suited, if 1's the tightest & 5's the most open, I went with number 4. Then it got a Jacuzzi
Because I'm at work I had to work with what I had, I only had the one 26g Kanthal coil here so spaced it out & put that in there. The screw trapping took me back a couple years but it wasn't too bad, it played nicely. Ohmed at .9, 7 wraps of 26g around the 2.5mm rod. Wicking, I have a couple of bags of Cotton Bacon Prime here so tore a strip off & slid it into the coil. Fitted the chamber in place over the cotton rabbit ears & snipped them at the top of the collar as per
@zouzounaki's advice. Then pushed them down over the oval wicking ports & job's a good one
It's the perfect MTL vape for me, exactly how I like it. Not too tight or lose. No sign of flooding or dry hitting, just spot on at 15w
Very cheap, very good clone with lots of versatility
Very happy ape