hi mate, I’m looking at getting the dotrba from BP mods if I don’t get on with the nautilus- can I use this RBA with 50/50 10mg nic salts?
Help with DotMod AIO V2
- Thread starter W30RTY
- Start date
hi mate, I’m looking at getting the dotrba from BP mods if I don’t get on with the nautilus- can I use this RBA with 50/50 10mg nic salts?
Not sure I can solve all your problems with the dotaio, but I’ve been using them for a while now, and with both stock coils and rebuildables
The stock dotcoils used in the V2 are meh, at best. The V1 dotcoils are maybe a little better, but not much…
I use exclusively the V1 tanks with the 1.0ohms Nautilus coils. It really isn’t possible to get a truly tight mtl from them (like I prefer). I use them with the tank fully closed off. And if I want it a bit tighter, I put a piece of tape over the intake on the panel so there’s only airflow from bottom of the panels. Not ideal, but it’s handy when I can’t be arsed to carry around all my gear.
If you do decide to go for a rebuildable, we can help you find one you will like
Hey mate, if I go for a rebuildable what would
Be my best option? I’m looking at the BP Mods dotRBA- would I be able to use 50/50 10mg nic salts with it?
D
Deleted member 54254
Guest
Sure, but I will add that I found the BP Dotrba a touch unreliable under TC in the DotAIO, works flawlessly in the Vi class which Evolution Vapes are selling for a tenner atmo.
ZenAnarchi
Achiever
- Joined
- May 8, 2022
- Messages
- 1,137
As has been mentioned, the two all time favs around here are the BP mods Dotrba and Atmizoo’s Dotshell
You really can’t go wrong with the BP mods bridge, it gives a quality vape for a reasonable price, it’s easy to build and wick, never leaks (for me), and has many airflow options
I only use 50:50 juices in it, and I use 6-9mg salts in it all the time…absolutely no issues
And if the salts gunk up the wick (mine doesn’t, but I don’t use sweet juices), just change the wick = 2 minutes
D
Deleted member 54254
Guest
https://www.3fvape.com/rebuildable-...mm-15mm.html?search_query=dotshell&results=17
The authentic is OOS.
The authentic is OOS.
As has been mentioned, the two all time favs around here are the BP mods Dotrba and Atmizoo’s Dotshell
You really can’t go wrong with the BP mods bridge, it gives a quality vape for a reasonable price, it’s easy to build and wick, never leaks (for me), and has many airflow options
I only use 50:50 juices in it, and I use 6-9mg salts in it all the time…absolutely no issues
many thanks that’s good to know! I think I would go with the BP Mods as I like the fact that it comes with the airflow holes whilst the dot shell you have to buy seperatly, it’s also looking not too hard to build on
Thanks John, I think I’m leaning towards the BP Mods Pioneer when it comes to the point of buying
Thanks John, I think I’m leaning towards the BP Mods Pioneer when it comes to the point of buying
why is the authentic one so much more expensive can I ask? Are the copies and clones inferior to it?
ZenAnarchi
Achiever
- Joined
- May 8, 2022
- Messages
- 1,137
If by OOS you mean Out of Stock, it’s still available in the uk for about £60
Thought you were a proponent of authentics over clones 
https://www.sr-vapes.co.uk/product/atmizoo-dotshell/?v=3e8d115eb4b3
The clone works just fine, I have both, not the same quality, but not much difference in the vape, in all honesty
D
Deleted member 54254
Guest
I wouldn'y say it was £50 better tbh.
Similar threads
