Help...

[Richard Winter]

Alright thanks for the help.

No problem. You can always use a coil wrap calculator and that will let you play with different wire types and gauges to get ur desired resistance and wraps.

 

[nwhornet]

I just like to vape at around 60w or so and i was told to get .25 for that, idk

Each to their own. The coil is close to the mouthpiece so heat is closer to the mouth.

 

[Zited]

Each to their own. The coil is close to the mouthpiece so heat is closer to the mouth.

Yeah it's a good rda thats the only negative imo

 

[nwhornet]

Yeah it's a good rda thats the only negative imo

Hence why higher ohm is sometimes better. 60w on an airy RTA/RDA is fine but the same build on a small deck with less airflow & smaller chamber/chimney tends not to be as enjoyable. Get some different guage wires, SS &/or Ni80 & experiment. Might be surprised at the results.

 

[Zited]

Hence why higher ohm is sometimes better. 60w on an airy RTA/RDA is fine but the same build on a small deck with less airflow & smaller chamber/chimney tends not to be as enjoyable. Get some different guage wires, SS &/or Ni80 & experiment. Might be surprised at the results.

Okays. What would be ur key build for a nanop wasp.

 

[nwhornet]

Okays. What would be ur key build for a nanop wasp.

Around 0.3-0.35ohm worked for me but it wasn't a favourite attie of mine. @Vapaneezer Scrooge still uses them, he may shed more light on it.

 

[Zited]

Around 0.3-0.35ohm worked for me but it wasn't a favourite attie of mine. @Vapaneezer Scrooge still uses them, he may shed more light on it.

Alright sweet, hopefully he replies hahaha

 

[cheltenham cat]

nano is a hot spitty bastard

 

[Banjostring]

I still use mine regularly, go to build is 5 wraps 24g brochrome with a small 510 drip tip to increase the distance from the coil to my mouth. Vapes a treat [emoji1303]

 

[Vapaneezer Scrooge]

60 watts is a lot higher than I would vape on this compact single coiler, my ideal vape with this atty is 0.3 Ohms using an Ni80 fused clapton and vaping in bypass mode or on a mech, I get a nice warm vape with less spitback on this setup, without digging it out and setting the watts I don't know the wattage exactly but it's around 35-40 watts I think, as @Banjostring says; a small 510 drip tip makes quite a difference too.

I haven't got a photo handy of the RDA but I coil it the same as the Wasp Nano RTA.