I fancy trying some budget fancy coils, ideally for 20-40 watts?

[conanthewarrior]

Hello everyone, I am in the mood to try some fancier coils such as fused claptons or aliens for RTA's and RDA's like my Kylin Mini RTA I am currently using, but have no idea what I am looking for or what budget brands make good coils.

I'm not a super high wattage vaper, so something that with a single coil works in the 20-40W range would be good, or for duals the 40-80W range which is quite high for me.

I would be using these for regulated vaping so the resistance is not too important, and something like a 2.5MM or 3MM ID would be perfect.

It would be even better if I could get them in SS316L so I can use TC on my Evolv and other TC powered boards.

If anyone can advise some cheap ones that are pretty decent I would be very thankful.

 

[MTB Vaper]

Been happy with the Wotofo quint coils £4 for 5 coils, there 5 cores N80 5x30/40. Done probly 3litres on pair in a DR3 RDA.

On a mech oumier Ni90 99p for 4 coils 2x26/38
There do N80 2x26/38

NI80 / NI90 PREMADE COILS PACK BY OUMIER - Juice for Days

Ni80: (26GA*2) + 38GA - 4pcs - 0.30 ohm Ni90: (26GA*2) + 38GA - 4pcs - 0.25 ohm

juicefordays.co.uk

 

[John R]

You ain't doing 20-40 Watts on those lumps...

 

[MTB Vaper]

You ain't doing 20-40 Watts on those lumps...

True the 5x30/40 I run around 50w to 60w and the Oumiers 60w to 70w in singles.
He might be better of with RDL spec coils but unsure of budget friendly ones I can recommend from my own experience.

 

[conanthewarrior]

Been happy with the Wotofo quint coils £4 for 5 coils, there 5 cores N80 5x30/40. Done probly 3litres on pair in a DR3 RDA.
View attachment 362439

On a mech oumier Ni90 99p for 4 coils 2x26/38
There do N80 2x26/38

NI80 / NI90 PREMADE COILS PACK BY OUMIER - Juice for Days

Ni80: (26GA*2) + 38GA - 4pcs - 0.30 ohm Ni90: (26GA*2) + 38GA - 4pcs - 0.25 ohm

juicefordays.co.uk

The Wotofo quint coils look cool but would be too power and juice hungry for me, however those 99P coils seem interesting.

They only have Ni90 in stock no Ni80, what is the difference between the two wire types? They come in at 0.25 Ohms so I imagine would run OK on my mechs, and also regulated I can just turn the power up a bit.

 

[conanthewarrior]

True the 5x30/40 I run around 50w to 60w and the Oumiers 60w to 70w in singles.
He might be better of with RDL spec coils but unsure of budget friendly ones I can recommend from my own experience.

Where is a good place to look for RDL spec coils? As that might be better for my power levels, and am willing to try a few different ones if they are available cheaply.

 

[Crispycritters]

Where is a good place to look for RDL spec coils? As that might be better for my power levels, and am willing to try a few different ones if they are available cheaply.

I'm assuming you intend them for single coilers...

In the 30 to 40 watt range I'd go for basic dual 28 core Ni80 fused claptons, Wotofo, Coilology and Vandy Vape all do their own versions, the Vandy ones use a 35ga outer wrap instead of the 36 of others, but tbh they seem to vape the same and they all seem to be of similar quality so any one should do.

If you're going to be vaping below 30 watts I'd go for Coilology MTL staple wire - which is 4 strands of 0.3 x 0.1 with a 40ga clapton outer wrap. Ignore the 'MTL' label - I've found it to run best above 20 watts and it's my go to for modest powered RDL.

Both can be found in SS316 variants, but I'm not sure about using complex wires for TC. I suspect you'd get better TC results from plain round-wire builds rather than complex coils using a mix of wires of different diameters,

 

[MTB Vaper]

Never used them but wotofo do these Aliens 3x30/38 0.5ohm.

https://bearsvapes.co.uk/products/wotofo-pre-built-alien-coils.

20w for me is MTL power so use 2x30/40 fused Claptons.

I actually use less power with the quint coils over the 99p Oumiers, as they use 30g as the cores and you get good surface area for the mass, it's a pretty thin flat coil