I'm thinking of buying this.?

[Mostly]

They one above pauly mentions

 

[Dyls]

Ok so more this

http://www.vapegeek.co.uk/Hcigar-Taifun-GT-77.htm

than

http://www.m-vapes.co.uk/store/p26/Kayfun_3.1_clone_rebuildable_atomizer.html

?

I really do appreciate all this help

Ta Dyl

 

[Mostly]

I recommend you buy this one http://www.m-vapes.co.uk/store/p16/Kayfun_Lite_plus_clone_Rebuildable_atomizer.html or in an ideal world the original from cloud9.
I found the 3.1 clone to be a bag of shit, I have not used a taifun.

 

[vaporsizer]

They are good attys no doubt. You might find a bit of trial & error before you get the set up just right but the vape will be good.
I had the kayfun lite for a while & it was the best tank vape i've had.

 

[tknoyle]

My first RBA was the igo-s easy to build from stealth vapes. Only problem was it was small but still easy to build. Prob suggest igo-l as its a bigish dripper perfect for building coils if your not used to drippers. or just go with a kayfun lite clone from focalecig costs you £16 ish and i havent had no problems yet.

 

[Dyls]

THANKS

Ok so the cheaper of the m-vape kayfun's.
http://www.m-vapes.co.uk/store/p16/Kayfun_Lite_plus_clone_Rebuildable_atomizer.html

Then what wire and wick.
I'm going to use this on a VAMO V5 so the coils will have to be above 1.5ohm.
I thought and wick and wire from my first post would be a good starting point.

Cheers Dyl

 

[Mostly]

It's pretty simple to coil have a Google on navy nest kfl, my regret is not getting a kfl sooner instead of forking out on various tanks drippers and the like.
Remember if all goes well to purchase the original at some point.
Good luck etc

 

[Dyls]

Thanks fella (tknoyle) but I don't wanna play with sites outside the UK.
In the future when I know more and have time maybe.
Thanks for the thought though.

Oh Merthyr Tydfil, near Ynysybwl my step-dads village.?

Ta Dyl


Edit: "Mostly"
Same I have a dripper but I'm not impressed I can taste plastic.
Cheap-cheap RDA, kinda waste of money.
But I understand how it works and it has helped push me into buying this next item.
I may have rushed into that but it was only a couple of quid.
Hence getting more advice this time.

 

[Mostly]

oh and get some syringes and needles from ebay , fillings much easier

 

[tknoyle]

Thanks fella (tknoyle) but I don't wanna play with sites outside the UK.
In the future when I know more and have time maybe.
Thanks for the thought though.

Oh Merthyr Tydfil, near Ynysybwl my step-dads village.?

Ta Dyl


Edit: "Mostly"
Same I have a dripper but I'm not impressed I can taste plastic.
Cheap-cheap RDA, kinda waste of money.
But I understand how it works and it has helped push me into buying this next item.
I may have rushed into that but it was only a couple of quid.
Hence getting more advice this time.

Yes not too far away from me and btw coiling is easy on the kayfun i'd suggest cotton for the wick, taste is much better. i do 10-12 wraps round a 5/64 drill bit with 28gauge kanthal, comes to 1.6/7 ohms its firing fine on mvp2 so should be same for your vamo. Tesco do baby cotton which is what im using boil it for 15 mins and dry it overnight and you've got months supply of cotton ready to wick up.